Pin Grouping By Function
Worked for 10 sec
Moved GND into the separate Ground section and retained the GND pin group.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 5 sec
There are currently 9 pin groups, not 10, and only four available orientations, so every group cannot have a unique orientation.
Should I:
- assign group orders 1–9 with Power = 1 and Ground = 9, alternating the others Left/Right; or
- split one group to create 10 groups, with Ground = 10?
Orientations would need to repeat across groups.
Use nine group orders
Create ten groups
