Part Review and Datasheet Update

Fix the VOUT/GND pin numbers, add pin types, then run ERC/DRC. also Provide a concise direct to the point best description for this part based from the datasheet. i don't need a very long but useless description.

Thought for 4 sec

flux

I’ll correct the LM35 pin metadata, tighten the project description from the datasheet, then run ERC/DRC to verify.

Worked for 1 min 42 sec

flux

Completed the LM35 cleanup: VOUT is now pin 2, GND is now pin 3, and pin types/descriptions are set to standard values. Updated the concise description to: “Precision analog temperature sensor, 10 mV/°C, TO-92.”

Open items:

None found.

Verification:

ERC/DRC/component review returned no ERROR/WARNING/OPEN/UNCERTAIN issues.

adrian95

Provide a concise direct to the point best description for this part based from the datasheet. i don't need a very long but useless description.

Thought for 5 sec

flux

I’ll replace the bloated description with a concise datasheet-based one.

Worked for 13 sec

flux

Updated the description to:

Precision Celsius analog temperature sensor, 10 mV/°C output, 4–30 V supply, TO-92.

Review and export

Verify part metadata

Run final checks

Export part data

Check footprint dimensions

Files

Pins

Symbol

Layout

3D View

LM35