Part Review and Datasheet Update

A

adrian95

Fix the VOUT/GND pin numbers, add pin types, then run ERC/DRC. also Provide a concise direct to the point best description for this part based from the datasheet. i don't need a very long but useless description.

flux

I’ll correct the LM35 pin metadata, tighten the project description from the datasheet, then run ERC/DRC to verify.

flux

Completed the LM35 cleanup: VOUT is now pin 2, GND is now pin 3, and pin types/descriptions are set to standard values. Updated the concise description to: “Precision analog temperature sensor, 10 mV/°C, TO-92.”
Open items:
  • None found.
Verification:
  • ERC/DRC/component review returned no ERROR/WARNING/OPEN/UNCERTAIN issues.
A

adrian95

Provide a concise direct to the point best description for this part based from the datasheet. i don't need a very long but useless description.

flux

I’ll replace the bloated description with a concise datasheet-based one.

flux

Updated the description to:
Precision Celsius analog temperature sensor, 10 mV/°C output, 4–30 V supply, TO-92.
Review and export
Verify part metadata
Run final checks
Export part data
Check footprint dimensions
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Description
Terminal Order
VS+
1
Power In
Terminal
Positive supply input, 4 V to 30 V
VOUT
2
Output
Terminal
Analog temperature output, 10 mV/°C
GND
3
Ground
Terminal
Ground/reference return

LM35