I’ve reconciled the executor’s report with the live symbol and footprint inspection. The audit covers all 64 numbered leads plus the exposed pad; I’m closing the checklist and preserving the detailed findings in the project file.
Audit complete for all 64 pins plus exposed pad. The official ST datasheet URL was already set, so no URL update was needed. Detailed results are in Part Datasheet Audit.
Key findings
Pins 1–64 names and numbers match the datasheet.
Footprint matches the fundamental TQFP64EP, 0.5 mm pitch, 10 × 10 mm body, and 4.5 × 4.5 mm exposed-pad geometry.
Incorrect metadata: Part Type = Inductors, Part Sub-Type = Fixed, plus an inapplicable empty Inductance property.
All 64 pins lack descriptions and have Pin Type = Unspecified.
Package/case metadata is missing.
EP is physically correct but its electrical designation as pin 65 and required connection are not defined by the datasheet.
Pin 53 NU must be connected to ground, but that requirement is not captured in its description.
Suggested next steps
Correct the IC classification and package metadata.
Populate all pin descriptions and electrical types.
Resolve the exposed-pad electrical connection using additional official ST guidance.
Review EP paste windowing, courtyard, and STEP-model alignment before release.