Fix Pin Designators

Fix the Designator on pins.

Thought for 7 sec

I’ll inspect the three terminals against the official IXFP36N20X3 pinout, correct their pin designators, and verify the result.

Worked for 2 mins 33 sec

flux

The package numbering is already 1/2/3, but the terminal labels are incorrectly stored as ~. I’m applying the focused correction to Gate, Drain, and Source now.

Worked for 53 sec

flux

Unable to persist the terminal designators due to a platform issue: edits report success but read back unchanged as ~.

Correct mapping confirmed:

Gate — pin 1
Drain — pin 2
Source — pin 3

The issue has been reported to the Flux engineering team; no unrelated properties were changed.

Fix labels and verify

Try alternate edit

Check footprint mapping

Review part quality

Create corrected component

Files

Pins

Symbol

Layout

3D View

IXFP36N20X3