Part Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 8 sec
I’ll audit the part metadata and existing symbol/footprint, locate the official Infineon datasheet if needed, update the Datasheet property, then report verified specs and any pin/package mismatches.
Worked for 5 mins 28 sec
Reviewed and updated the part’s Datasheet URL to the official Infineon datasheet.
Verified: IPB160N04S4H1ATMA1, N-channel MOSFET, 40 V, 160 A, 1.6 mΩ max at 10 V gate drive, ±20 V VGS, 137 nC max gate charge, 167 W, −55°C to +175°C, AEC-qualified, PG-TO263-7-3. Pin mapping is correct: 1=Gate, 2/3/5/6/7=Source, 4+tab=Drain.
Flagged mismatches:
- Description uses PG-TO263-7 instead of exact PG-TO263-7-3.
- Footprint is named for unrelated
IRFS7430TRL7PP. - Lead pads are 0.8 × 4.6 mm versus Infineon’s 0.7 × 4.6 mm recommendation.
- Drain land/paste geometry and segmented stencil apertures do not match the recommended pattern.
- All terminal pin types are
Unspecified. - Symbol is not rendered as a conventional N-channel MOSFET.
I filed an internal part-quality report covering these issues.
Fix part issues
Correct footprint geometry
Run part review
Export part data
