LED Part Audit

C

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll inspect the part metadata, look for any missing official datasheet link, then compare symbol/footprint/pin details against the sourced datasheet and summarize findings.

flux

I found the footprint asset name IN-P416ASUW.kicad_mod, which identifies the part as Inolux IN-P416ASUW; I found the official Inolux PDF. I’m extracting the pin/package details now and checking them against the current symbol/footprint.
Created a project doc

Part Datasheet Audit — LED

View Document
Date: 2026-07-21 Project: silicon-yard/led

flux

Completed the part audit and set the project-level Datasheet URL to the official Inolux IN-P416ASUW datasheet. I also created the detailed report: Part Datasheet Audit — LED.
Open items:
  • Metadata mismatch: current MPN is LED; it should be IN-P416ASUW.
  • Symbol issue: pins lack Anode/Cathode descriptions and are typed Unspecified.
  • Footprint issue: current pad geometry appears materially different from the Inolux recommended solder pattern.
Suggested next steps:
  1. Update MPN/manufacturer/package metadata.
  2. Set pin 1 = Anode and pin 2 = Cathode.
  3. Correct the footprint pad geometry to match the datasheet.
Fix metadata and footprint
Update part metadata
Set pin polarity
Correct footprint geometry
Run verification
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified

IN-P416ASUW