Part Audit Review
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 10 sec
I’ll audit the part metadata, locate the official Infineon datasheet if needed, update the Datasheet property, then compare the symbol, footprint, and pin definitions against it.
Worked for 6 mins 1 sec
Created a project doc
IM70A135 Part Audit
Manufacturer: Infineon Technologies Official product: IM70A135 / datasheet device type IM70A135V01
Audit complete. I added the official Infineon datasheet URL and verified that the 5-pin symbol, differential-output pinout, package dimensions, lands, acoustic port, and keepout match the datasheet; no electrical or manufacturability-critical geometry errors were found.
Flagged metadata issues include missing Manufacturer, Package, explicit Description and Pin Description properties, plus an inconsistent footprint filename (
PG-TLGA-5-2-V versus official PG-TLGA-5-5). The full specifications and comparison are in IM70A135 Part Audit.Fix metadata and review
Fix missing metadata
Add pin descriptions
Review footprint naming
Run quality review
Refine this doc
Ask about this doc
IM70A135 Part Audit
Official source
- Manufacturer: Infineon Technologies
- Official product: IM70A135 / datasheet device type IM70A135V01
- Official datasheet: https://www.infineon.com/assets/row/public/documents/24/49/infineon-im70a135-datasheet-en.pdf
- Datasheet version/date: V1.00, 2023-04-03
- Product status: Active and preferred
- Ordering part number shown by Infineon: IM70A135V01XTMA1
Existing part information reviewed
Table
| Field | Current state | Datasheet cross-check |
|---|---|---|
| Project/part name | IM70A135 | Matches product family name |
| Manufacturer Part Number | IM70A135 | Valid family/base identifier, but less specific than datasheet device type IM70A135V01 and ordering code IM70A135V01XTMA1 |
| Manufacturer | Not set | Should be Infineon Technologies |
| Description | Project description: “High Performance Analog XENSIV MEMS Microphone”; no explicit part property found | Functionally correct |
| Pin count | 5 terminals / 5 numbered pads | Correct |
| Package property | Not explicitly set | Datasheet package is PG-TLGA-5-5 |
| Datasheet URL | Was missing; updated during this audit | Now points to official Infineon PDF |
| Designator prefix | U? | Acceptable for an integrated MEMS microphone |
Pin cross-check
Table
| Pin | Current symbol name | Current type | Datasheet name/function | Result |
|---|---|---|---|---|
| 1 | VDD | Power In | VDD — Power supply | Match |
| 2 | GND | Power In | GND — Ground | Match; “Power In” is acceptable though Ground would be more semantically specific if supported |
| 3 | OUT_P | Output | Output + — Differential Output + | Match |
| 4 | OUT_N | Output | Output - — Differential Output - | Match |
| 5 | GND | Power In | GND — Ground | Match |
The symbol terminal properties do not currently include explicit Pin Description text. Names, numbers, and electrical types are nevertheless consistent with the datasheet.
Footprint cross-check
- Footprint asset filename:
IFX-PG-TLGA-5-2-V.kicad_mod - Datasheet package:
PG-TLGA-5-5 - 3D model asset:
PG-TLGA-5-5.stp - Body outline represented in the footprint: 3.50 mm × 2.65 mm, matching the datasheet nominal dimensions.
- Four rectangular lands are 0.54 mm × 0.75 mm at the datasheet-recommended locations.
- PCB acoustic port is 0.60 mm diameter, matching the recommendation.
- The copper annulus around the sound port implements the datasheet diameters: approximately 1.725 mm outer and 0.985 mm inner.
- Pin numbering and pad locations are consistent with the datasheet land pattern.
- The footprint includes the acoustic-port copper keepout.
Footprint flag
The footprint asset filename contains
PG-TLGA-5-2-V, while the official package and 3D model are PG-TLGA-5-5. The actual geometry reviewed matches the IM70A135 datasheet, so this appears to be a naming/provenance mismatch rather than a land-pattern error.Key specifications
Table
| Parameter | Datasheet value |
|---|---|
| Interface | Analog differential |
| Supply, normal mode | 2.3–3.0 V; 2.75 V typical |
| Supply, low-power mode | 1.52–1.8 V; 1.6 V typical |
| Absolute maximum VDD | 3.0 V |
| Current, normal mode | 170 µA typical, 230 µA maximum |
| Current, low-power mode | 70 µA typical, 80 µA maximum |
| Sensitivity | −38 dBV typical; −39 to −37 dBV |
| SNR | 70 dB(A) normal mode; 69 dB(A) low-power mode |
| Acoustic overload point | 135 dBSPL normal mode; 130 dBSPL low-power mode |
| Operating temperature | −40 to +85 °C |
| Storage temperature | −40 to +100 °C |
| Package | PG-TLGA-5-5 |
| Nominal dimensions | 3.50 × 2.65 × 1.00 mm |
Findings
Confirmed correct
- Five-pin count
- Complete pin numbering and functional mapping
- Differential output polarity
- Body dimensions and recommended land sizes
- 0.6 mm acoustic port and surrounding copper geometry
- Acoustic-port copper keepout
Metadata gaps / mismatches
- Manufacturer property is missing; official value is Infineon Technologies.
- Explicit Package/Case property is missing; official value is PG-TLGA-5-5.
- Explicit part Description property was not found, although the project description is correct.
- MPN is stored as IM70A135, while the datasheet device type is IM70A135V01 and the orderable code is IM70A135V01XTMA1. This should be clarified based on whether the property is intended to identify the product family or an exact purchasable SKU.
- Footprint asset filename says PG-TLGA-5-2-V despite geometry matching PG-TLGA-5-5.
- Pin Description properties are absent, although terminal names and pin types are correct.
No electrical pinout or manufacturable footprint geometry mismatch was found.
Official source
Existing part information reviewed
Pin cross-check
Footprint cross-check
Footprint flag
Key specifications
Findings
Confirmed correct
Metadata gaps / mismatches
