Samtec Header Audit
Thought for 3 mins 58 sec
Thought for 4 sec
Referenced guidance.
Thought for 22 sec — Considering delegation for audit/update
Created a thread
Samtec Header Audit
Completed
View Thread
Thought for 7 sec
Awaiting 1 background task
Received notification from "Samtec Header Audit" that it finished — picking the work back up.
Thought for 6 sec
The audit executor is complete. I’m reconciling its findings now and will independently verify the stored Datasheet URL, symbol pins, and footprint before closing.
Thought for 32 sec
I found the executor’s report and am checking the flagged mount classification, malformed symbol, and drill geometry directly against the live project.
Thought for 1 min 47 sec
Audit completed and independently verified. The full findings are in HTSW-125-07-G-D Part Audit.
- Pass: Exact Samtec MPN; 50 symbol pins and 50 footprint pads; continuous numbering; correct 2×25 arrangement and 2.54 mm pitch/row spacing.
- Key specs: Vertical through-hole header, 0.64 mm square terminals, 1.02 ±0.03 mm recommended PCB holes, 10 µin gold posts, −55°C to +125°C.
- Mismatches:
Mount = Wireis incorrect; Part Type/package/pitch/row metadata are missing; all pins lack descriptions and useUnspecifiedtype; symbol rendering is malformed. - Critical: Pads expose no explicit plated-through-hole/drill rules and appear to inherit SMD/0.7 mm defaults. The part is not production-cleared.
- The Datasheet URL was already populated with an official Samtec document, so it was not changed.
- I filed an internal part-quality report covering the footprint, symbol, and metadata issues.
Fix part metadata
Repair footprint holes
Clean symbol terminals
Re-audit corrected part
