Pass: Exact Samtec MPN; 50 symbol pins and 50 footprint pads; continuous numbering; correct 2×25 arrangement and 2.54 mm pitch/row spacing.
Key specs: Vertical through-hole header, 0.64 mm square terminals, 1.02 ±0.03 mm recommended PCB holes, 10 µin gold posts, −55°C to +125°C.
Mismatches:Mount = Wire is incorrect; Part Type/package/pitch/row metadata are missing; all pins lack descriptions and use Unspecified type; symbol rendering is malformed.
Critical: Pads expose no explicit plated-through-hole/drill rules and appear to inherit SMD/0.7 mm defaults. The part is not production-cleared.
The Datasheet URL was already populated with an official Samtec document, so it was not changed.
I filed an internal part-quality report covering the footprint, symbol, and metadata issues.
Corrected Mount to Through Hole and verified the stored package, 2.54 mm pitch, 2 rows, 50 positions (25 per row), and −55°C to +125°C temperature range. Samtec’s current and voltage ratings depend on the mating connector, so I documented those conditions rather than storing misleading unconditional ratings.
Details and sources are in Metadata Update. Symbol and footprint repairs remain open; neither was changed or published.