Part Datasheet Audit
Thought for 5 sec
I’ll audit the part metadata, source the official datasheet if needed, update its Datasheet property, then verify the symbol, footprint, and pin descriptions against the manufacturer documentation.
Worked for 20 sec
I’m inspecting the current metadata and both rendered representations now; next I’ll compare them to the official onsemi documentation.
Worked for 4 mins 18 sec
Audit complete against the official onsemi H11L1M-family datasheet.
- Matches: MPN H11L1M, ON Semiconductor/onsemi, 6-pin PDIP, CASE 646BX, 2.54 mm pitch, 7.62 mm row spacing, and pinout 1–6: Anode, Cathode, NC, VO, GND, VCC.
- Key specs: 3–15 V operating supply, 1.6 mA maximum turn-on threshold, open-collector output sinking 16 mA at 0.4 V maximum, 1 MHz typical NRZ, and 4170 VAC RMS isolation.
- Flagged metadata issues: all symbol pins have electrical type Unspecified; pin descriptions are not explicitly stored; pin 3 is named NC but lacks an explicit no-connect/excluded setting.
- Footprint: its encoded dimensions match CASE 646BX. Exact pad/drill primitives were unavailable to the inspection index, so those could not be independently dimension-checked.
- A Datasheet URL was already present, so it was left unchanged as requested.
Fix metadata and verify
Fix pin metadata
Mark NC explicitly
Verify exact footprint
