H1102NLT Audit

C

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata and geometry against the official Pulse Electronics datasheet, add the datasheet URL if missing, then report specifications and any symbol/footprint/pin mismatches.
Thought for 6 mins 51 sec
Thought for 6 sec — Planning inspection and research
Referenced guidance.
Thought for 14 sec
Thought for 6 sec
Awaiting 1 background task
Received notification from "H1102NLT Audit" that it finished — picking the work back up.

flux

Audit completed. The official Pulse Electronics datasheet URL was added to the part.
  • Matches: H1102NLT MPN, 12 active terminals, 16 physical leads, omitted NC symbol pins, 1.27 mm pitch, and pad width.
  • Key specs: 10/100BASE-T Ethernet magnetics, 1:1 TX/RX ratios, 1500 Vrms isolation, 0°C to +70°C operation, SMT, RoHS-6.
  • Critical mismatches: footprint row spacing is 8.53 mm versus 8.89 mm specified; pads are 1.67 mm long versus 1.27 mm recommended. Symbol pins lack functional names/descriptions and the transformer/choke topology is unclear.
  • Assessment: not recommended for production as-is. I filed a part-quality report with the Flux engineering team.
Full evidence: H1102NLT Part Audit.
Fix part library issues
Review corrected part
Inspect 3D model fit
Show footprint changes
Sign up to send

Files

Pins

Symbol

Layout

Preview

16
Pin Number
16
1
Pin Number
1
10
Pin Number
10
8
Pin Number
8
14
Pin Number
14
9
Pin Number
9
11
Pin Number
11
6
Pin Number
6
3
Pin Number
3
2
Pin Number
2
15
Pin Number
15
7
Pin Number
7
H1102NLT Part Audit
Status
  • Official datasheet sourced: Complete.
  • Datasheet property mutation: Applied via commit 4cfa514b using the official direct Pulse Electronics URL.
  • Symbol audit: Complete; no geometry changed.
  • Footprint audit: Complete; no geometry changed.
  • 3D/package audit: Complete; no geometry/model changed.
Authoritative source
Official manufacturer-controlled datasheet URL:
https://productfinder.pulseelectronics.com/api/open/part-attachments/datasheet/H1102NLT
Pulse identifies the device as a single-port 10/100BASE-T surface-mount Ethernet magnetics module, 1:1 transmitter and 1:1 receiver, non-PoE, RoHS-6 compliant.
Existing part metadata before audit
  • Project/part name: H1102NLT
  • Part UID: d511517a-1a3f-4f23-a871-5751879182e9
  • MPN: H1102NLT — correct.
  • Designator prefix: T — appropriate for transformer.
  • Lifecycle: Active.
  • Terminal count: 12 electrical terminals.
  • Description: NA / Manufacturer Recommendation / Pulse Electronics — inadequate and not a product description.
  • Manufacturer Name property: blank — mismatch/omission.
  • Part Type property: blank — mismatch/omission; should identify a transformer/Ethernet magnetics device.
  • Datasheet URL: blank before audit.
  • Package property/code: not populated.
  • No useful pin names or pin descriptions were populated; terminals contained pin numbers and Passive type only.
Datasheet key specifications
  • Function: single-port 10/100BASE-T / 100BASE-TX isolation and data-interface Ethernet transformer/choke.
  • Turns ratio: TX 1:1; RX 1:1.
  • Mounting/construction: SMT, open-frame package.
  • Operating temperature: 0°C to +70°C.
  • Storage temperature: -25°C to +125°C.
  • Isolation/hipot: 1500 Vrms minimum.
  • Insertion loss, 100 kHz–100 MHz: -1.1 dB maximum.
  • Return loss typical: -20 dB at 30 MHz; -14 dB at 60 MHz; -11.5 dB at 80 MHz.
  • Differential-to-common-mode rejection typical: -42 dB at 30 MHz; -37 dB at 50 MHz; -33 dB at 100 MHz.
  • Crosstalk typical: -45 dB at 30 MHz; -40 dB at 60 MHz; -35 dB at 100 MHz.
  • Compliance: IEEE 802.3; RoHS-6; UL 94V-0 or better plastic; manufacturer listing also states REACH compliant and EAR99.
  • Peak reflow rating: 245°C.
  • Coplanarity: 0.10 mm maximum.
  • Ordering: NL denotes RoHS compliant; T denotes tape-and-reel. H1102NLT is tape-and-reel, 600 pieces/reel; tube quantity is 40.
Datasheet mechanical and land-pattern data
  • Package/body length: 12.70 mm.
  • Package/body width: 9.40 mm in the official drawing.
  • Maximum seated height: 6.20 mm (manufacturer product metadata reports approximately 5.969 mm nominal/category value).
  • Lead pitch: 1.27 mm.
  • Lead-row center spacing: 8.89 mm.
  • Lead width: 0.48 mm.
  • Suggested PCB pad: 1.27 mm long × 0.76 mm wide.
  • General dimensional tolerance unless otherwise specified: ±0.25 mm.
Electrical pin topology from datasheet

Table

PinDatasheet function
1PHY-side transmit winding end, TD+
2PHY-side transmit center tap
3PHY-side transmit winding end, TD-
4No internal connection
5No internal connection
6PHY-side receive winding end, RD+
7PHY-side receive center tap
8PHY-side receive winding end, RD-
9Cable-side receive winding/choke end, RX-
10Cable-side receive center tap
11Cable-side receive winding/choke end, RX+
12No internal connection
13No internal connection
14Cable-side transmit winding/choke end, TX-
15Cable-side transmit center tap
16Cable-side transmit winding/choke end, TX+
Symbol cross-check
Exact matches
  • The 12 electrically active terminal numbers are present: 1, 2, 3, 6, 7, 8, 9, 10, 11, 14, 15, 16.
  • Pins 4, 5, 12, and 13 are omitted from the electrical symbol, consistent with the datasheet marking them as no internal connection.
  • All electrical pins are typed Passive, which is acceptable for transformer windings and center taps.
Mismatches / defects
  • All 12 terminals lack functional pin names and descriptions. Therefore the part does not convey TD±, RD±, cable-side TX/RX polarity, or center-tap roles.
  • The rendered symbol does not clearly reproduce the datasheet transformer/common-mode-choke topology; it is essentially a generic box with terminals and unreadable/garbled internal text. This creates a substantial wiring-error risk.
  • The symbol's left/right grouping is directionally plausible (PHY side pins 1–8 left and cable side pins 9–16 right), but vertical order is not a clear representation of the datasheet topology.
Footprint cross-check
Exact matches
  • Physical pad count: 16, matching the package's 16 leads.
  • Pad numbering: 1 through 16 exists in the imported KiCad footprint source.
  • Pins 4, 5, 12, and 13 are present physically but unbound to electrical terminals, appropriate for no-internal-connection leads.
  • Pitch within each row: 1.27 mm — exact match.
  • Pad width along the pin row: 0.76 mm — exact match to the suggested pad width.
  • Body/fabrication outline: 7.11 mm × 12.70 mm in the footprint orientation; the 12.70 mm length matches. The 7.11 mm outline appears to represent the narrower body dimension used by some product listings, while the official current drawing/product metadata also reports an overall width near 9.40 mm including leads.
  • Pin-1 marker is present.
Exact mismatches
  • Pad length perpendicular to the body is 1.67 mm, while the official suggested pad length is 1.27 mm: footprint pads are 0.40 mm longer.
  • Pad-row center spacing is 8.53 mm (x = ±4.265 mm), while the datasheet suggested layout specifies 8.89 mm: rows are 0.36 mm too close together (0.18 mm per side).
  • Because the row spacing is narrower than specified, the footprint is not an exact match to Pulse's recommended land pattern. The longer pads partly compensate for toe/heel coverage, but this is not evidence of manufacturer approval.
3D/package information
  • A STEP model named H1102NLT.step is attached to the layout and resolves through Flux's asset pipeline.
  • Model scale is 1:1 and position is at the footprint origin.
  • Current inspected state shows a 90° X-axis rotation applied to the model.
  • The project does not expose validated model bounding dimensions in the inspected node (packageSize is zeroed), so exact 3D dimensional conformity and seating cannot be proven from metadata alone.
  • The manufacturer product listing advertises an official H1102NL_3D.zip; the existing model name is consistent with the part, but provenance was not recorded in the part properties.
Usability assessment
Not recommended as-is for production use. The footprint differs materially from the official recommended row spacing, and the symbol lacks pin function names/descriptions and a clear transformer topology. The electrical terminal numbers themselves are correct, and the 16 physical pads include the four no-internal-connection leads, so an expert could use the part only after independently checking every connection and accepting/revalidating the nonstandard land pattern.
Mutation performed
Only the missing datasheet property was targeted, per scope:
  • Datasheet URL → https://productfinder.pulseelectronics.com/api/open/part-attachments/datasheet/H1102NLT
  • Mutation commit: 4cfa514b
No symbol, footprint, pad, or 3D geometry was intentionally altered by this audit. Note that another active thread was concurrently modifying this project; the commit diff contains unrelated symbol/pad-designator and model-orientation changes not requested by this audit.

  • Status

  • Authoritative source

  • Existing part metadata before audit

  • Datasheet key specifications

  • Datasheet mechanical and land-pattern data

  • Electrical pin topology from datasheet

  • Symbol cross-check

  • Exact matches

  • Mismatches / defects

  • Footprint cross-check

  • Exact matches

  • Exact mismatches

  • 3D/package information

  • Usability assessment

  • Mutation performed