Part Datasheet Review and Verification
Thought for 8 sec
I’ll inspect the current part metadata, find and attach the official datasheet if needed, then compare the symbol/footprint/pin data against it and report any mismatches.
Worked for 1 min 43 sec
The part already has an Omron datasheet URL set, so I’ll use that as the authoritative source and proceed with the cross-check.
Worked for 6 mins 40 sec
Reviewed the part against the existing official Omron datasheet; no Datasheet URL update was needed. Full findings are in Part Datasheet Review — G6S-2 DC5.
Open items:
- MPN
G6S-2 DC5conflicts with the surface-mount description; datasheet says this exact MPN is PCB-terminal/through-hole, while SMT variants areG6S-2ForG6S-2G. - Symbol pin numbers/functions match the datasheet, but pin descriptions/types are missing.
- Footprint appears badly scaled and pad geometry does not match either the through-hole or SMT datasheet footprint.
Suggested next steps:
- Confirm whether the intended part is through-hole
G6S-2 DC5or SMTG6S-2F/G DC5. - Rebuild the footprint for the confirmed variant.
- Populate terminal pin descriptions and pin types from the datasheet.
Use through-hole variant
Use SMT outside-L
Use SMT inside-L
Fix pin metadata
Run validation review
Refine this doc
Ask about this doc
Part Datasheet Review — G6S-2 DC5
Source
- Manufacturer: Omron
- MPN in project:
G6S-2 DC5 - Existing datasheet URL: https://components.omron.com/us-en/sites/components.omron.com.us/files/datasheet_pdf/K093-E1.pdf
- Datasheet status: already present, official Omron components domain. No property update was needed.
Project metadata reviewed
- Project name:
G6S-2_DC5 - Description:
Surface-mounting Relay, Single-side stable, DPDT, PCB terminal - Published as part: yes
- Part UID:
a1467a5a-ecd2-4360-8390-26b87c347d5a - Part Type:
Electromechanical Components - Mount:
Surface Mount - Designator Prefix:
K - Component count: 8 terminal components
- BOM items: 0
- Nets: 0
- PCB layout nodes: 12
Datasheet key specs for G6S-2 DC5 family
Important model distinction from datasheet:
G6S-2 DC5= PCB terminal through-hole version.G6S-2F DC5= surface-mount, outside-L terminals.G6S-2G DC5= surface-mount, inside-L terminals.
The project description says both “surface-mounting” and “PCB terminal”; for Omron this is ambiguous/conflicting. The exact MPN
G6S-2 DC5 corresponds to PCB terminals, not the SMT -2F or -2G versions.Coil
- Rated coil voltage: 5 VDC
- Rated coil current: 28.1 mA
- Coil resistance: 178 ohm, ±10% at 23 °C
- Must operate voltage: 75% max. of rated voltage = 3.75 V max.
- Must release voltage: 10% min. of rated voltage = 0.5 V min.
- Maximum coil voltage: 200% at 23 °C = 10 V max.
- Power consumption: approx. 140 mW
- Coil polarity is explicitly shown: pin 1 = coil +, pin 12 = coil −
Contacts
- Contact form: DPDT / 2 Form C / 2c
- Contact type: bifurcated crossbar
- Contact material: Ag (Au-Alloy)
- Rated load: 0.5 A at 125 VAC; 2 A at 30 VDC
- Rated carry current: 2 A
- Maximum switching voltage: 250 VAC, 220 VDC
- Maximum switching current: 2 A
- Initial contact resistance: 75 mΩ max.
Package / mechanical
Common body:
- Body length: 14.8 ±0.2 mm
- Body width: 7.3 ±0.2 mm
- Body height: 9.2 ±0.2 mm
- Longitudinal terminal pitch sequence: 5.08 mm, 2.54 mm, 2.54 mm
For
G6S-2 PCB-terminal version:- 8 PCB holes, 1.0 mm diameter
- Row pitch: 5.08 ±0.1 mm
- Footprint view: bottom view
For SMT
G6S-2F / G6S-2G:- 8 rectangular pads, 1.0 mm × 2.2 mm
- Same X positions: 0, 5.08, 7.62, 10.16 mm
- Outside-L
-2F: top/bottom pad outside-to-outside dimension 8.0 mm - Inside-L
-2G: top/bottom pad outside-to-outside dimension 6.1 mm - Footprint view: top view
Symbol pin cross-check
Project terminal mapping:
Table
| Project terminal | Project pin number | Datasheet function | Status |
|---|---|---|---|
COIL+ | 1 | Coil + | OK |
COIL_- | 12 | Coil − | OK |
N.C._1 | 3 | Pole A NC, connected to pin 4 when de-energized | OK |
COM_1 | 4 | Pole A common | OK |
N.O._1 | 5 | Pole A NO, connected to pin 4 when energized | OK |
N.O._2 | 8 | Pole B NO, connected to pin 9 when energized | OK |
COM_2 | 9 | Pole B common | OK |
N.C._2 | 10 | Pole B NC, connected to pin 9 when de-energized | OK |
Symbol pin numbering and function labels match the datasheet.
Footprint cross-check
Observed PCB pad positions/rules from the layout tool:
Table
| Pad | Observed position | Observed size | Observed shape |
|---|---|---|---|
COIL+ | x=0, y=0 | 0.0015 × 0.0015 mm | rectangle |
COIL_- | x=0, y=0.00508 | 0.0015 × 0.0015 mm | circular |
N.C._1 | x=0.00508, y=0 | 0.0015 × 0.0015 mm | circular |
N.C._2 | x=0.00508, y=0.00508 | 0.0015 × 0.0015 mm | circular |
COM_1 | x=0.00762, y=0 | 0.0015 × 0.0015 mm | circular |
COM_2 | x=0.00762, y=0.00508 | 0.0015 × 0.0015 mm | circular |
N.O._1 | x=0.01016, y=0 | 0.0015 × 0.0015 mm | circular |
N.O._2 | x=0.01016, y=0.00508 | 0.0015 × 0.0015 mm | circular |
The position numbers appear scaled as meters or otherwise unit-misinterpreted relative to the expected millimeter footprint. If interpreted literally as millimeters, the pad spacing is 0.00508 mm / 0.01016 mm, not the datasheet’s 5.08 mm / 10.16 mm. The pad size is also far too small for either the through-hole or SMT version.
Expected by exact MPN
G6S-2 DC5:- Through-hole / PCB-terminal footprint, not SMT pads.
- 8 holes, each 1.0 mm diameter.
- Row pitch 5.08 mm.
- X positions 0, 5.08, 7.62, 10.16 mm.
Expected if the intended part is actually SMT:
- MPN should be
G6S-2F DC5orG6S-2G DC5, notG6S-2 DC5. - Pads should be rectangular, 1.0 × 2.2 mm.
- Row spacing should match the selected SMT variant: 8.0 mm outside-to-outside for
-2F, or 6.1 mm outside-to-outside for-2G.
Mismatches / issues flagged
- MPN vs description/mount conflict: Project MPN is
G6S-2 DC5, which the datasheet identifies as PCB-terminal through-hole. Project description and Mount property say surface-mount. If SMT is intended, the MPN should likely beG6S-2F DC5orG6S-2G DC5. - Footprint pad geometry mismatch: Current footprint pads are effectively 0.0015 mm and circular except pin 1, which does not match either the through-hole 1.0 mm holes for
G6S-2or the SMT 1.0 × 2.2 mm rectangular pads forG6S-2F/G. - Footprint scale mismatch: Pad positions appear to use 0.00508 and 0.01016 where datasheet dimensions require 5.08 mm and 10.16 mm, suggesting a 1000× unit scaling issue.
- Pin descriptions missing: Terminals have no useful
Pin Description; all havePin Type: Unspecified. The pin numbers and labels are correct, but descriptions/types should be populated from the datasheet for clarity and ERC quality. - Part Type is generic/nonstandard for relay: Project
Part TypeisElectromechanical Components; a more specific relay classification would be clearer if supported by the property system.
Recommended next action
Decide intended physical variant first:
- If exact MPN
G6S-2 DC5is required: change the part metadata to through-hole / PCB terminal and rebuild the footprint with 8 through-hole pads/holes per datasheet. - If surface-mount is required: change the MPN to either
G6S-2F DC5orG6S-2G DC5and rebuild the footprint using the correct SMT pad row spacing.
After that, update terminal pin descriptions and pin types from the datasheet.
Source
Project metadata reviewed
Datasheet key specs for G6S-2 DC5 family
Coil
Contacts
Package / mechanical
Symbol pin cross-check
Footprint cross-check
Mismatches / issues flagged
Recommended next action
