Relay Part Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 11 sec
I’ll audit the part metadata, source the official datasheet if needed, update the Datasheet property, then verify symbol pins and footprint geometry against the manufacturer documentation.
Worked for 6 mins 13 sec
Audit complete. The existing Datasheet URL already points to the official Omron G5LE datasheet, so no update was required.
- Verified: G5LE-14 DC5, fully sealed SPDT relay, five PCB terminals; pinout is correct: 1=COM, 2/5=coil, 3=NO, 4=NC.
- Footprint matches: five Ø1.3 mm holes and correct 2.0/12.2/12.0 mm spacing; 1.95 mm pads provide a 0.325 mm annular ring.
- Key ratings: 5 V coil, 79.4 mA, 63 Ω, approximately 400 mW; 10 A at 120 VAC or 8 A at 30 VDC resistive; −25°C to +85°C; 22.5 × 16.5 × 19.0 mm maximum.
- Mismatches: symbol graphics are malformed and do not clearly depict an SPDT relay; pin descriptions are missing and all pin types are
Unspecified; library indexing incorrectly identifies the part as an IC/logic AND gate; the footprint source name referencesDC12, although the mechanical footprint is shared and geometrically correct.
I filed an internal part-quality report covering the symbol and classification issues.
Fix symbol and metadata
Correct library classification
Rename footprint asset
Export audit report
