Reviewed the Harwin G125-MV12005M2P part information against the official Harwin product page/drawing. The existing Datasheet URL is populated, but it points to an uploaded PDF copy; the official Harwin drawing URL is https://content.harwin.com/asset/9080e3a3-bca3-45d8-8fc9-6c172eec098d/DRG-02638-Technical-Drawing-Datasheet-G125-MV1XX05M2P-pdf.pdf.
Key specs: 20 contacts, 10+10 double row, 1.25 mm pitch, vertical through-hole male Gecko-SL, Screw-Lok board mount, 3.0 mm PC tail, 5.0 mm studs, M2 thread, 2.8 A max individual / 2 A simultaneous at 25 °C, -65 °C to +150 °C.
Flagged mismatches / risks:
- Footprint signal holes are
Ø0.60 mm; Harwin recommended PCB layout calls for Ø0.55 mm typ.
- Mounting holes are
Ø2.20 mm; Harwin recommends Ø2.25 mm.
- Symbol pins are generic terminals with no useful pin descriptions; acceptable for a connector, but all pin types are currently “Unspecified.”
- Datasheet property is not the direct official Harwin URL, though it does contain a datasheet PDF.