Part Datasheet Review and Update
Thought for 6 sec
I’ll inspect the part metadata, look for an official datasheet if needed, update the Datasheet property, then compare symbol/footprint/pins against the source and summarize any issues.
Worked for 3 mins 32 sec
Reviewed the Harwin G125-MV12005M2P part information against the official Harwin product page/drawing. The existing Datasheet URL is populated, but it points to an uploaded PDF copy; the official Harwin drawing URL is
https://content.harwin.com/asset/9080e3a3-bca3-45d8-8fc9-6c172eec098d/DRG-02638-Technical-Drawing-Datasheet-G125-MV1XX05M2P-pdf.pdf.Key specs: 20 contacts, 10+10 double row, 1.25 mm pitch, vertical through-hole male Gecko-SL, Screw-Lok board mount, 3.0 mm PC tail, 5.0 mm studs, M2 thread, 2.8 A max individual / 2 A simultaneous at 25 °C, -65 °C to +150 °C.
Flagged mismatches / risks:
- Footprint signal holes are
Ø0.60 mm; Harwin recommended PCB layout calls forØ0.55 mm typ. - Mounting holes are
Ø2.20 mm; Harwin recommendsØ2.25 mm. - Symbol pins are generic terminals with no useful pin descriptions; acceptable for a connector, but all pin types are currently “Unspecified.”
- Datasheet property is not the direct official Harwin URL, though it does contain a datasheet PDF.
Fix footprint and review
Fix datasheet URL
Correct hole sizes
Improve pin metadata
Run design review
To get started, talk to Flux or create a New Document.
