Part Datasheet Audit
Thought for 7 sec
I’ll audit the part metadata and existing symbol/footprint, locate the official manufacturer datasheet if needed, update the Datasheet property, then document verified specs and any mismatches.
Thought for 1 min 44 sec
The official E‑Switch drawing and FS5700 series datasheet are verified. I found significant classification/pin-description issues and am now applying the missing datasheet link before finalizing the audit.
Worked for 1 min 59 sec
Created a project doc
Part Datasheet Audit
Part Datasheet Audit
Scope
Audit of E-Switch FS57003PLT2B2M2QE metadata, schematic terminals/symbol, PCB footprint, and pin descriptions against the official manufacturer-generated part drawing and FS5700 series datasheet.
Authoritative sources
- Part-specific E-Switch drawing: https://configured-product-images.s3.amazonaws.com/2D/specs/FS57003PLT2B2M2QE.pdf
- E-Switch FS5700 series datasheet: https://configured-product-images.s3.amazonaws.com/Datasheets/FS5700.pdf
- Manufacturer product page: https://www.e-switch.com/product/fs5700-series-pushbutton-foot-switch/
Verification note: the PDFs were read using OCR and independently cross-checked against the footprint geometry. Critical production dimensions should still be checked visually on the linked manufacturer drawing...
Audit complete. I added the official E‑Switch FS5700 datasheet URL and created the detailed Part Datasheet Audit.
Key findings: the 3PDT pin grid and numbering are correct, but the footprint uses 1.20 mm drills instead of the specified 1.50 mm, the symbol lacks switch contacts and pin descriptions, and the part is incorrectly indexed as Logic/AND. I filed an internal part-quality report; the footprint drill/pad correction remains necessary before manufacturing.
Fix footprint and symbol
Add pin descriptions
Correct metadata
Review corrected part
