Part Review and Datasheet Update
Worked for 1 min 18 sec
Completed the part review and set the official Espressif ESP32-S3-DevKitC-1 v1.1 documentation as the Datasheet URL. I created the full review report here: ESP32-S3-DEVKITC-1-N16R8V Part Review.
Open items:
- GPIO35/GPIO36/GPIO37 are exposed as normal bidirectional pins, but for the N16R8V/WROOM-2 variant they are used internally for flash/PSRAM and should be flagged as unavailable.
- GPIO38 should mention the v1.1 RGB LED connection.
- Pin descriptions could be enriched with official alternate functions and power-source notes.
Suggested next steps:
- Update the affected pin descriptions/properties.
- Clean up the part description text.
- Re-check the footprint dimensions if numeric pad/outline data becomes available.
Thought for 4 sec
I’ll update the flagged GPIO/power/USB pin descriptions, clean up the project description, then run ERC/DRC and report remaining issues.
Worked for 53 sec
Pin descriptions and the project description are updated. I’m running the electrical and layout checks now.
Worked for 1 min 4 sec
Updated the flagged pin descriptions for GPIO35/GPIO36/GPIO37, GPIO38, USB D+/D−, and power pins, and replaced the noisy part description with a concise Espressif/N16R8V-specific description.
Open items:
- ERC/DRC returned no matching errors, warnings, or informational checks; the review system reports a fresh review timestamp but no check entries for this part-only project.
Suggested next steps:
- Optionally rename
5V0to5Vfor exact Espressif header naming. - Add richer alternate-function descriptions to every GPIO terminal if you want a fully annotated symbol.
- Re-run part review checks after publishing or before library reuse.
Rename and annotate pins
Rename 5V pin
Annotate all GPIOs
Verify footprint dimensions
Export review report
