Part Review and Datasheet Update

flux

Completed the part review and set the official Espressif ESP32-S3-DevKitC-1 v1.1 documentation as the Datasheet URL. I created the full review report here: ESP32-S3-DEVKITC-1-N16R8V Part Review.
Open items:
  • GPIO35/GPIO36/GPIO37 are exposed as normal bidirectional pins, but for the N16R8V/WROOM-2 variant they are used internally for flash/PSRAM and should be flagged as unavailable.
  • GPIO38 should mention the v1.1 RGB LED connection.
  • Pin descriptions could be enriched with official alternate functions and power-source notes.
Suggested next steps:
  1. Update the affected pin descriptions/properties.
  2. Clean up the part description text.
  3. Re-check the footprint dimensions if numeric pad/outline data becomes available.
A

adrian95

Fix the flagged pin descriptions, clean up the part description, then run an ERC/DRC review.

flux

I’ll update the flagged GPIO/power/USB pin descriptions, clean up the project description, then run ERC/DRC and report remaining issues.

flux

Pin descriptions and the project description are updated. I’m running the electrical and layout checks now.

flux

Updated the flagged pin descriptions for GPIO35/GPIO36/GPIO37, GPIO38, USB D+/D−, and power pins, and replaced the noisy part description with a concise Espressif/N16R8V-specific description.
Open items:
  • ERC/DRC returned no matching errors, warnings, or informational checks; the review system reports a fresh review timestamp but no check entries for this part-only project.
Suggested next steps:
  1. Optionally rename 5V0 to 5V for exact Espressif header naming.
  2. Add richer alternate-function descriptions to every GPIO terminal if you want a fully annotated symbol.
  3. Re-run part review checks after publishing or before library reuse.
Rename and annotate pins
Rename 5V pin
Annotate all GPIOs
Verify footprint dimensions
Export review report
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
3V3
J1_1
Power In
Top
3.3 V supply pin. May be used as a 3.3 V rail/output when board is powered from USB/5V, or as an external 3.3 V input; Espressif power-source options are mutually exclusive.
3V3
J1_2
Power In
Top
3.3 V supply pin. May be used as a 3.3 V rail/output when board is powered from USB/5V, or as an external 3.3 V input; Espressif power-source options are mutually exclusive.
RST
J1_3
Input
GPIO4
J1_4
Bi-Directional
GPIO5
J1_5
Bi-Directional
GPIO6
J1_6
Bi-Directional
GPIO7
J1_7
Bi-Directional
GPIO15
J1_8
Bi-Directional
GPIO16
J1_9
Bi-Directional
GPIO17
J1_10
Bi-Directional
GPIO18
J1_11
Bi-Directional
GPIO8
J1_12
Bi-Directional
GPIO3
J1_13
Bi-Directional
GPIO46
J1_14
Bi-Directional
GPIO9
J1_15
Bi-Directional
GPIO10
J1_16
Bi-Directional
GPIO11
J1_17
Bi-Directional
GPIO12
J1_18
Bi-Directional
GPIO13
J1_19
Bi-Directional
GPIO14
J1_20
Bi-Directional
5V0
J1_21
Power In
Top
5 V power-supply pin. Per Espressif, powering through USB, 5V/GND pins, or 3V3/GND pins are mutually exclusive power options.
GND
J1_22
Power In
Bottom
GND
J3_1
Power In
Bottom

ESP32-S3-DEVKITC-1-N16R8V