Check this schematic component against the datasheet for [MPN] and assign the correct pin orientation, section, and terminal order without changing, replacing, renumbering, or remapping any pins. Remove the Pin Group property from all pins if it exists. Place Power pins first and Ground pins last. Within each section, distribute the pins as evenly as possible between the left and right sides; for example, split 10 pins as 5/5 and 11 pins as 5/6 or 6/5. If a section contains only one pin, leave it on the most appropriate side. Keep the symbol compact, balanced, and visually symmetrical. If a pin function is unclear, assign Unclear / Check datasheet, then apply all changes directly to the schematic component.
I’ll incorporate this into the audit using the current part, ESP32-C5-Zero, as the target MPN. I’ll preserve every existing pin number and mapping, assign datasheet-backed descriptions/types plus balanced symbol orientation and ordering, remove any Pin Group properties, and then verify the result.
Updated all 18 symbol terminals against Waveshare’s official ESP32-C5-Zero documentation: pin mappings were preserved, Pin Group was removed, descriptions/types were corrected, and sections/orientations/orders were balanced with power first and ground last.
The full specifications, footprint comparison, sources, and flagged metadata/mechanical risks are in ESP32-C5-Zero Part Audit. The part-level Datasheet property was not exposed for safe editing; the recommended URL is https://docs.waveshare.com/ESP32-C5-Zero.