Quectel EG915N Pin Audit
Make the functional group more general.
Add a Section property to all pins, and apply the same value used in the Pin Group property to each pin's Section property.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 14 sec
To apply this correctly, one conflict needs clarification: the part currently has more than 10 pin groups, while you requested Terminal Order values 1–10.
Should I consolidate all pins into exactly 10 general groups, with every pin in a group sharing its group’s Terminal Order?
Proposed groups:
- Power — Top
- Control & Status — Left
- USB — Right
- UART & Debug — Left
- SIM — Right
- Digital Interfaces — Left
- Analog & Audio — Right
- RF & GNSS — Left
- Reserved — Right
- Ground — Bottom
Each pin’s Section would exactly match its Pin Group. Confirm this grouping and I’ll apply it directly.
Confirm grouping
Also fix GRFC names
Keep pin names
Add pin descriptions
Set pin types
