Part Review Mismatch
Worked for 3 mins 44 sec
Official ECS datasheet found and the part-level Datasheet URL is now set. I’m cross-checking the symbol and footprint details against the datasheet values next.
Worked for 14 mins 52 sec
Created a project doc
Part Information Review: ECS-480-7-33B2-CTN-TR3
Review date: 2026-07-22 Official product page: https://ecsxtal.com/products/crystals/surface-mount-crystals/ecs-480-7-33b2-ctn-tr3/
Completed the part review and updated the part’s Datasheet URL to the official ECS PDF:
https://www.ecsxtal.com/store/pdf/ECS-33B2.pdf.I created the detailed findings in Part Information Review: ECS-480-7-33B2-CTN-TR3. Key flags: footprint pad size and horizontal spacing match, but the vertical pad center spacing appears to be 1.8 mm vs. 1.9 mm from OCR’d datasheet land pattern; GND pins are typed as
Power In; pin descriptions are missing; and the part is labeled as an oscillator even though the datasheet describes a passive crystal.Suggested next steps:
- Visually confirm the datasheet land-pattern vertical spacing before changing the footprint.
- Update GND terminal pin types and pin descriptions.
- Improve the part description and Part Type if the taxonomy supports
Crystal.
Fix issues and verify
Fix pin metadata
Verify land pattern
Run review checks
Export footprint report
