Part Review and Datasheet Verification
Thought for 5 sec
I’ll update the datasheet-backed pin metadata first, then rebuild the footprint as a proper 40-pin 600 mil PDIP and verify the result.
Worked for 1 min 54 sec
Symbol pin metadata is updated; I’m now correcting the footprint scale/geometry to match the 40-pin 600 mil PDIP.
Worked for 5 mins 54 sec
Updated the dsPIC30F4013 part: added datasheet-backed pin descriptions, corrected pin types, added missing alternate-function labels, normalized AVSS, and rebuilt the footprint as a 40-pin 600 mil PDIP with 2.54 mm pitch, 15.24 mm row spacing, 1.6 mm through-hole pads, 0.8 mm drills, and a pin-1 marker.
Open items:
- Flux did not apply the case-only rename from
VsstoVSSon the duplicate ground pins, but their pin type, descriptions, numbers, and footprint pads are corrected.
Suggested next steps:
- Re-run the part review to confirm no remaining symbol/footprint mismatches.
- Publish the corrected component version.
- Optionally switch the Datasheet URL to the official Microchip PDF.
Review, publish, datasheet
Final part review
Publish component
Update datasheet URL
Check ERC DRC
