Datasheet Audit
Thought for 3 mins 7 sec
Thought for 8 sec
Getting project info.
Thought for 11 sec
Reading project assets.
Thought for 11 sec
Thought for 6 sec
1/2 Restore MPN and use supplied PDF URL to finish datasheet-backed part corrections.
Restore MPN and use supplied PDF URL to finish datasheet-backed part corrections.
Verify corrections and summarize any remaining blockers.
Thought for 7 sec
Awaiting 1 task
"DPS310XTSA1 Part Audit" completed.
Thought for 1 min 33 sec
The supplied PDF is now readable, and I restored the MPN to
DPS310XTSA1. I’m applying its confirmed specifications and pin functions; pressure precision will be recorded as RMS noise, not as an accuracy tolerance.Thought for 13 mins 12 sec
Thought for 6 sec
Awaiting 1 task
"DPS310XTSA1 Part Audit" completed.
Thought for 2 mins 54 sec
Thought for 7 sec
Managing 1 task
Thought for 14 sec
2/2 Verify corrections and summarize any remaining blockers.
Restore MPN and use supplied PDF URL to finish datasheet-backed part corrections.
Verify corrections and summarize any remaining blockers.
Thought for 17 sec
Awaiting 1 task
"DPS310XTSA1 Datasheet Verification" completed.
Thought for 50 sec
Using the PDF, I corrected the description/specifications, package designation, all eight pin descriptions, and pin types, and restored the MPN to
DPS310XTSA1. My earlier claim that the pad mapping was reversed was incorrect; the mapping matches the datasheet and was left unchanged.The changes are saved but not published; exact land, mask, and paste dimensions still need package-drawing verification, and paste output needs a Gerber check before fabrication—details are in Part Correction Audit.
