CMX7341Q3 Review
Worked for 2 mins 19 sec
Added broad Pin Group metadata to all 49 terminals and set Section equal to Pin Group for each one.
Open items:
- Verified coverage across all terminals.
- Groups used: Power, Ground, Auxiliary Interface, Host Interface, Control, Digital I/O, Clock, Analog Input, Analog Reference, Analog Output, Auxiliary ADC, and Auxiliary DAC.
Suggested next steps:
- Assign Terminal Order and Pin Orientation for cleaner symbol layout.
- Run a schematic/symbol review to catch any remaining metadata gaps.
Assign Terminal Order and Pin Orientation, then run a schematic/symbol review.
Thought for 7 sec
I’ll assign terminal ordering/orientation by functional group, then inspect the symbol metadata for consistency and remaining issues.
Worked for 4 mins 41 sec
Assigned Pin Orientation and Terminal Order across all 49 terminals, then verified the symbol metadata.
Open items:
- Power pins are Top / order 1; ground and substrate are Bottom / order 10.
- Remaining groups are distributed Left/Right consistently by function.
- The available schematic/symbol review checks returned no reported issues for the requested symbol/terminal checks.
Suggested next steps:
- Visually inspect the generated symbol layout.
- Publish/update the part if the layout looks correct.
- Optionally review the footprint paste/thermal pad next.
Inspect and publish
Inspect symbol layout
Review thermal pad
Publish the part
Run full checks
