Part Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 7 sec
I’ll audit the current C30737MH-230-80A metadata and datasheet, then verify its symbol, footprint, and pin mapping against the manufacturer documentation.
Worked for 4 mins 15 sec
Audit complete. Metadata identifies an Excelitas C30737MH-230-80A, 2-terminal silicon APD in a 1.75 × 2.0 mm LLC SMD package; the existing datasheet is valid, so no URL update was required.
Key specs: 230 µm active diameter, 800 nm peak response, 500–1100 nm spectral range, 120–160 V breakdown bin, 1 pF typical capacitance, 1.3 GHz bandwidth, and 0.05 nA typical dark current.
Critical mismatch: the symbol, footprint, and 3D model are still VEMD2704 assets. The Excelitas drawing labels terminals ANODE/CATHODE but does not assign pin numbers, so the current
1=K, 2=A numbering is unverified. I filed an internal part-quality report; this part should not be used for PCB fabrication until its assets are replaced.Rebuild and verify
Create correct component
Check official pinout
Update properties
Revert bad rename
