Part Datasheet Review
Worked for 3 mins 17 sec
Updated all 65 terminals so Pin Group and Section are populated and identical using broad functional groups: Power, Ground, Cell Monitor, Communication, GPIO, Current Sense, and Thermal Pad.
Open items:
AVSS_2remains grouped as Thermal Pad because pin 65 is the exposed PowerPAD, not a normal datasheet pin.
Suggested next steps:
- Rename
AVSS_2toPowerPADorEP. - Rebuild the HTQFP-64 PAP footprint.
- Run part review checks after the footprint is fixed.
Assign Terminal Order and Pin Orientation, then run a schematic/symbol review.
Thought for 10 sec
I’ll assign terminal order and orientation by broad groups using your conventions, then run symbol/part checks and verify the schematic metadata.
Worked for 3 mins 13 sec
Assigned Terminal Order and Pin Orientation for all 65 terminals: Power = order 1/top, Cell Monitor = 2/left, Communication = 3/right, GPIO = 4/right, Current Sense = 5/left, Thermal Pad = 9/bottom, Ground = 10/bottom.
Open items:
- Schematic/symbol review returned no open warnings/errors for the checked component-review categories.
- Footprint quality is still a separate unresolved issue from the prior review.
Suggested next steps:
- Rebuild the HTQFP-64 PAP0064F footprint.
- Run footprint/layout checks after footprint generation.
- Publish the part once footprint checks pass.
Build footprint and checks
Rebuild footprint
Run footprint checks
Prepare for publishing
