Part Review Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 7 sec
I’ll inspect the part metadata, look for an official datasheet if needed, update the Datasheet property, then compare symbol/footprint/pin data against the datasheet and summarize any mismatches.
Worked for 1 min 2 sec
Found the official Samtec drawing/datasheet and added it to the part project’s Datasheet URL property. I’m now checking the 400 terminal pins and footprint pads against the Samtec source.
Worked for 5 mins 38 sec
Created a project doc
ASP-230333-03 Part Review
Date: 2026-07-13 Reviewed available Flux part information for the published part project ASP-230333-03, found and set the official Samtec da...
Completed the ASP-230333-03 review and added the official Samtec datasheet URL to the part project. The core 400-position A-D / 01-100 connector array and main footprint geometry match the datasheet; flagged items are incomplete structured metadata, missing pin descriptions, stencil-aperture representation, and unverified drill/plating details for the four non-signal mechanical pads.
Full report: ASP-230333-03 Part Review
Fix metadata and verify
Fix metadata gaps
Verify mechanical pads
Add pin descriptions
Run DRC check
