Pin Grouping by Function
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 6 sec
I’ll apply a global 1–10 ordering by functional group: Power first at 1 and Ground last at 10, with the remaining groups spaced between them. I’ll alternate the non-power groups between Left and Right so adjacent groups do not share the same orientation.
Worked for 1 min 22 sec
Updated and verified all terminal groups:
- 1 — Supply: Top
- 2 — Analog Inputs: Left
- 4 — Reference: Right
- 6 — Clock: Left
- 7 — SPI: Right
- 9 — Data Ready: Left
- 10 — Ground: Bottom
All 16 pins retain their original names, numbers, and mappings.
Check symbol visual layout
Set terminal pin types
Review part footprint
