Part Information Review and Validation
Update the pin descriptions and package properties to resolve the flagged issues.
Thought for 12 sec
I’ll update the terminal pin descriptions and refine the package-related project properties, then quickly re-inspect the part metadata to confirm the flagged issues are resolved.
Worked for 42 sec
Pin metadata is updated; I also added an explicit package implementation detail. I’ll re-read the project and schematic now to confirm the changes landed.
Thought for 15 sec
Updated and verified the flagged metadata issues.
Open items:
- All 16 terminals now have descriptive pin text and
Passivepin type. - Package metadata is now explicit:
8-position SMD DIP switch, with implementation details noting 16 gull-wing terminals, raised actuator, and 2.54 mm pitch.
Suggested next steps:
- Run the part review checks again if you want a formal pass/fail status.
- Do a final numeric footprint-land verification against the Omron pad drawing before publishing/manufacturing.
Run checks and verify
Run part checks
Verify footprint dimensions
Update review document
Export validation report
