Pin Grouping Request
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation
Thought for 7 sec
I’ll remap the symbol into a 1–10 functional ordering with Power first and Ground last, then alternate the remaining groups between the left and right sides while keeping each group internally ordered.
Worked for 1 min 42 sec
Updated and verified the symbol:
- Power is first and oriented Top
- Ground is last and oriented Bottom
- Eight intermediate groups alternate between Left and Right
- All 28 terminals have unique, consecutive internal orders while following the requested 10-group sequence
- Pin names, numbers, electrical types, and mappings remain unchanged
Verify symbol layout
Set pin electrical types
Add pin descriptions
Check footprint mapping
