Part Audit Review


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, locate the official datasheet if needed, update the Datasheet property, and verify the symbol, footprint, and pin definitions against the manufacturer documentation.
Created a project doc

Part Audit Report

View Document

Part Audit Report Identification and available metadata Official source and variant ambiguity
WE-HCI 1050 is available in multiple electrically different order codes. The family sheet lists 1050 variants spanning approximately:
  • Inductance: 0.16 µH to 16 µH
  • Rated current: 5 A to 25 A
  • Saturation current: 6.5 A to 58 A
  • DC resistance: 0.51 mΩ to 35.5 mΩ
Therefore no single inductance, current rating, DCR, tolerance, or exact product datasheet can be assigned until the numeric Würth order code is known.
Schematic symbol audit
Completed the audit and added the official Würth WE-HCI family datasheet. The symbol and 1050 land pattern match, but WE-HCI_1050 is a family/package label—not an orderable MPN—so exact inductance, current, DCR, and temperature specifications remain unresolved.
Full findings: Part Audit Report.
Improve part metadata
Choose exact MPN
Verify model alignment
Audit individual variant

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Passive
2
2
Passive

744325330