Part Verification Review

C

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll inspect the part metadata and existing symbol/footprint, look up the official datasheet if needed, update the Datasheet property, then verify pin/footprint details against the source.

flux

I found the connector behind the footprint as Molex 5031590600 and added the official Molex drawing/datasheet URL to the part properties; now I’m validating the symbol and footprint details against that source.
Created a project doc

Part Verification Report

View Document
Date: 2026-07-13 Project: CONN_006P_000C_1

flux

Done — I added the official Molex sales/customer drawing URL as the part’s Datasheet URL and created the full verification notes in Part Verification Report.
Key flags: the footprint/symbol mostly match Molex 5031590600, but the MPN metadata still says CONN_006P_000C_1, manufacturer metadata is missing, and the terminal drill is slightly larger than Molex’s recommended hole range. Suggested next step: update the MPN/manufacturer properties and decide whether to tighten the terminal drill to the Molex recommendation.
Fix metadata and holes
Fix flagged issues
Update part metadata
Adjust terminal drills
Run verification checks
Sign up to send

Files

Pins

Symbol

Layout

3D View

5031590600