Relay Part Audit
Thought for 6 mins 30 sec
Thought for 6 sec
Referenced guidance.
Created 5 tasks.
1/5 Inspect all current part metadata, symbol pins, and footprint geometry
Inspect all current part metadata, symbol pins, and footprint geometry
Find and validate the official manufacturer datasheet
Update the Datasheet property if missing
Cross-check symbol, footprint, and pin descriptions against the datasheet
Document key specifications and mismatches
Thought for 22 sec — Researching relevant functions
Thought for 5 sec
Awaiting 1 background task
Thought for 6 sec
Reading Relay Part Audit's report…
Received notification from "Relay Part Audit" that it finished — picking the work back up.
Thought for 9 sec
The audit is complete; I’m reconciling its findings against the live part data and independently verifying the reported symbol and footprint mismatches before closing.
Thought for 2 mins 27 sec
Audit reconciled and independently verified against Finder’s official S45EN datasheet. The existing datasheet URL was retained because it was already populated.
Key issues: pin 14 is incorrectly named
COM_2 instead of NO, symbol graphics/types/descriptions are incomplete, and footprint drills are 1.7 mm versus the specified Ø1.5 mm. Pin numbering and 25 × 7.5 mm spacing are correct. I also filed a part-quality report.Full specifications and evidence: Part Audit and Datasheet Validation.
Correct symbol and footprint
Improve part metadata
Verify STEP model
