Datasheet Part Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 7 sec
I’ll audit the part metadata, locate the official datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin definitions against it.
Worked for 2 mins 40 sec
The existing datasheet link was present but broken; I replaced it with the working official Littelfuse PDF. I’m finishing the symbol, footprint, and metadata cross-check now.
Worked for 1 min 16 sec
Audit complete. The broken Datasheet URL was replaced with the working official Littelfuse PDF.
- Verified: MPN
1812L050/60MR, Littelfuse, 1812 SMD PPTC, 2 terminals, 0.50 A hold, 1.00 A trip, 60 VDC max, 10 A fault current, 0.150–1.000 Ω resistance. - Footprint: Pad dimensions
1.78 × 3.15 mmand spacing match the datasheet recommendation; body outline matches the specified4.37–4.73 × 3.07–3.41 mm. - Mismatches: Symbol terminals have no descriptions and are typed Unspecified rather than Passive. The footprint asset is named
1812L010DR, although its geometry and attached1812L050_60MR3D model are correct.
Fix metadata issues
Set passive pins
Rename footprint asset
Run part checks
Add key properties
