Part Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 5 sec
I’ll audit the part metadata, locate the official Phoenix Contact datasheet if needed, update the Datasheet property, then compare the symbol and footprint against the manufacturer documentation.
Worked for 2 mins 43 sec
Audit complete. The existing Datasheet URL already points to the official Phoenix Contact product documentation, so no update was necessary.
- Confirmed: MPN 1803374, Phoenix Contact MC 1,5/12-G-3,81, 12 positions, single row, 3.81 mm pitch, 8 A, 160 V, wave-soldered THT, Ø1.2 mm holes, 0.8 × 0.8 mm pins, 47.11 mm overall width.
- Symbol/footprint: Pins and pads 1–12 are complete and sequential; footprint pitch and 1.8 mm pad diameter are consistent with the datasheet.
- Flagged metadata mismatches:
Mount = Screwshould describe PCB mounting as Through-hole / Wave soldering; project-level prefix is J, while terminal records contain P; pin types and descriptions are unspecified rather than identified as passive connector contacts. - No critical pin-map or footprint mismatch found.
Fix metadata and verify
Fix metadata mismatches
Improve pin descriptions
Verify mechanical model
