Part Audit Review

flux

I’ll audit the part metadata, locate the official Phoenix Contact datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin descriptions against it.

flux

Audit complete. The official Phoenix Contact datasheet was already correctly linked, so no property update was needed.
  • Symbol: Correct 10-pin numbering; pin descriptions/types and connector graphics are incomplete.
  • Footprint: Critical error—pad pitch and dimensions are 1000× underscaled, and the required 1.4 mm plated holes are missing. Do not fabricate with this footprint.
  • An internal part-quality report was filed.
Full findings: Part Audit Report
A

adrian95

Add a connector body, pin-1 marker, and Contact 1–10 descriptions to the schematic symbol.

flux

I’ll add a clear connector-body graphic and pin-1 marker, label each terminal Contact 1–10, then inspect the rendered symbol to verify it.

flux

Added and verified:
  • Connector body and pin-1 marker are present.
  • Pins 1–10 now have Contact 1 through Contact 10 descriptions.
  • All contacts retain passive pin types, numbering, and positions.
Repair footprint geometry
Add pin-1 indicator
Review corrected footprint
Improve metadata
Sign up to send

Files

Pins

Symbol

Layout

Preview

6
Pin Number
6
1
Pin Number
1
2
Pin Number
2
10
Pin Number
10
3
Pin Number
3
7
Pin Number
7
5
Pin Number
5
4
Pin Number
4
8
Pin Number
8
9
Pin Number
9
Name
Pin #
Type
Part Type
Pin Description
Pin Group
Pin Orientation
Terminal Order
1
1
Passive
Terminal
Contact 1
Contacts
Left
1
2
2
Passive
Terminal
Contact 2
Contacts
Left
2
3
3
Passive
Terminal
Contact 3
Contacts
Left
3
4
4
Passive
Terminal
Contact 4
Contacts
Left
4
5
5
Passive
Terminal
Contact 5
Contacts
Left
5
6
6
Passive
Terminal
Contact 6
Contacts
Left
6
7
7
Passive
Terminal
Contact 7
Contacts
Left
7
8
8
Passive
Terminal
Contact 8
Contacts
Left
8
9
9
Passive
Terminal
Contact 9
Contacts
Left
9
10
10
Passive
Terminal
Contact 10
Contacts
Left
10

1757323