Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll inspect the part metadata, look for an official datasheet if needed, update the Datasheet property only if it’s missing, then compare symbol/footprint/pin info against the datasheet and report mismatches.
Reviewed the Molex 105309-1202 part against official Molex data. The Datasheet URL was already set to the official Molex sales drawing, so I did not change it.
Full findings are in Part Review - Molex 105309-1202. Key result: identity and footprint dimensions look consistent; main flagged issues are missing pin descriptions and Unspecified pin types, which should be Passive with descriptions like Circuit 1 / CKT 1 and Circuit 2 / CKT 2.
Suggested next steps:
Update terminal pin metadata to Passive.
Add pin descriptions for both contacts.
Visually verify the CKT1 marker orientation against the Molex connector-side PCB view before publishing any footprint revision.