HARTING Part Review
Worked for 1 min 2 sec
The part already has a Datasheet URL set, so I’ll use that source and skip the web-update step unless the datasheet tool cannot read it.
Worked for 13 mins 36 sec
Created a project doc
Part Information Review — HARTING 09231326921
Date: 2026-07-21 Reviewed project-level part metadata, schematic terminal definitions, PCB footprint geometry, and available datasheet/produ...
Completed the part review and created the detailed report: Part Information Review — HARTING 09231326921. The Datasheet URL was already set, so I did not change it; the key issue found is the footprint mounting-hole spacing: current 48.62 mm vs. official 48.26 ±0.05 mm.
Open items:
- Correct MH1/MH2 X coordinates before relying on the footprint mechanically.
- Add pin descriptions and set connector pins to Passive/Bi-Directional.
- Clarify MH1/MH2 as mechanical/fixing holes unless electrically intentional.
Suggested next steps:
- Fix the mounting-hole coordinates.
- Update pin descriptions/types.
- Re-run a footprint/symbol verification after edits.
Fix and verify
Fix mounting holes
Update pin metadata
Clarify mounting holes
Run final review
Name
Pin #
Type
Part Type
Terminal Order
A1
A1
Unspecified
Terminal
A2
A2
Unspecified
Terminal
A3
A3
Unspecified
Terminal
A4
A4
Unspecified
Terminal
A5
A5
Unspecified
Terminal
A6
A6
Unspecified
Terminal
A7
A7
Unspecified
Terminal
A8
A8
Unspecified
Terminal
A9
A9
Unspecified
Terminal
A10
A10
Unspecified
Terminal
A11
A11
Unspecified
Terminal
A12
A12
Unspecified
Terminal
A13
A13
Unspecified
Terminal
A14
A14
Unspecified
Terminal
A15
A15
Unspecified
Terminal
A16
A16
Unspecified
Terminal
C1
C1
Unspecified
Terminal
C2
C2
Unspecified
Terminal
09231326921
