HARTING Part Review

Worked for 1 min 2 sec

The part already has a Datasheet URL set, so I’ll use that source and skip the web-update step unless the datasheet tool cannot read it.

Worked for 13 mins 36 sec

Created a project doc

Part Information Review — HARTING 09231326921

View Document

Date: 2026-07-21 Reviewed project-level part metadata, schematic terminal definitions, PCB footprint geometry, and available datasheet/produ...

flux

Completed the part review and created the detailed report: Part Information Review — HARTING 09231326921. The Datasheet URL was already set, so I did not change it; the key issue found is the footprint mounting-hole spacing: current 48.62 mm vs. official 48.26 ±0.05 mm.

Open items:

Correct MH1/MH2 X coordinates before relying on the footprint mechanically.
Add pin descriptions and set connector pins to Passive/Bi-Directional.
Clarify MH1/MH2 as mechanical/fixing holes unless electrically intentional.

Suggested next steps:

Fix the mounting-hole coordinates.
Update pin descriptions/types.
Re-run a footprint/symbol verification after edits.

Fix and verify

Fix mounting holes

Update pin metadata

Clarify mounting holes

Run final review

Files

Pins

Symbol

Layout

Preview

Part Information Review — HARTING 09231326921

Date: 2026-07-21

Scope

Reviewed project-level part metadata, schematic terminal definitions, PCB footprint geometry, and available datasheet/product drawing information for the published part project.

Current Flux Part Metadata

Table

Field	Current value
Project / part name	`09231326921`
Published part UID	`0236e3e7-ff7a-4de4-bc3f-559b2db31fb4`
Manufacturer Part Number	`09231326921`
Manufacturer Name	`HARTING`
Datasheet URL	`https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/b8432a9a5467ae8424659533632d5654e63ce04f3f543b3903a7582dfb5214b2.pdf`
Package or Case Code	`DIN`
Designator Prefix	`J`
Project description	`DIN 2C male angled, 32pin, PL2 (rows a,c loaded)`
Schematic terminals	34 terminal components: A1–A16, C1–C16, MH1, MH2
Footprint pads	34 pads: A1–A16, C1–C16, MH1, MH2

The Datasheet URL was already populated, so no Datasheet property update was required. An official HARTING product page was also found at https://harting.com/09231326921, and a HARTING product drawing was found at https://b2b.harting.com/files/download/PRD/PDF_TS/0923132X921_100072926DRW027A.PDF.

Datasheet / Official Source Summary

Table

Spec	Datasheet / official source value
Article number	`09 23 132 6921` / `09231326921`
Product name / specification	`DIN-Signal 2C032MS-3,0C1-2`
Series / standard	DIN 41612 / IEC 60603-2
Type	2C
Connector element	Male connector
Contact style	Angled / right-angle
Termination	Wave soldering / through-hole solder pins
Connection type	Motherboard-to-daughtercard, extender card, PCB-to-cable
Number of contacts	32
Contact population	Rows a and c, positions 1–16; row b omitted
Contact rows	3-row connector family, with rows a and c populated for this part
Contact pitch	2.54 mm on termination and mating side
Row a-to-c spacing	5.08 mm, derived from the 2.54 mm DIN row spacing with row b omitted
Contact PCB drill	Ø1.0 ±0.1 mm per HARTING drawing
Mounting/fixing PCB holes	2 × Ø2.8 +0.1 mm per HARTING drawing
Mounting-hole center spacing	48.26 ±0.05 mm per HARTING drawing
Overall length	54 mm nominal class / drawing shows 54 −0.1 mm
Plan/body outline	Drawing extraction: 46.9 −0.2 mm length, 11 −0.2 mm width
Rated current	2 A at 20 °C; see derating curve
Test voltage	1 kV RMS
Contact resistance	≤20 mΩ
Insulation resistance	>10¹² Ω on product sheet; general family text also reported min. 10¹⁰ Ω
Clearance / creepage	≥1.2 mm / ≥1.2 mm
Temperature range	−55 °C to +125 °C
Performance level	2 according to IEC 60603-2
Mating cycles	≥400
Insert material	Glass-fiber reinforced thermoplastic, UL 94 V-0
Contact material / plating	Copper alloy; Au over NiP over Ni on mating side, Sn over Ni termination side
RoHS / lead-free	RoHS compliant; lead-free reported
Hot plugging	No
GTIN	5713140041530

Schematic Symbol Cross-Check

Passes

Symbol/terminal set includes all expected loaded signal contacts: A1–A16 and C1–C16.
No row-b signal terminals are present, matching the datasheet contact population for rows a and c only.
Symbol includes MH1 and MH2 mounting/fixing features, matching the physical part having fixing flanges.
Project designator prefix is J, appropriate for a connector.

Issues / mismatches

All signal terminals currently have Pin Type: Unspecified. For a passive board connector, A1–A16 and C1–C16 should normally be Passive or Bi-Directional according to the library convention.
Pin descriptions are missing/unspecified. Recommended descriptions are Row a contact 1 … Row a contact 16, and Row c contact 1 … Row c contact 16.
MH1/MH2 are currently represented as unspecified terminals. They should be documented as mechanical/fixing flange holes, and only treated electrically if the flange/pad is intentionally connected in the target design.

Footprint Cross-Check

Contact array

Table

Footprint feature	Current footprint	Datasheet/drawing	Result
A-row pitch	2.54 mm	2.54 mm	Match
C-row pitch	2.54 mm	2.54 mm	Match
A-to-C row spacing	5.08 mm	5.08 mm	Match
Loaded contacts	A1–A16, C1–C16	Rows a and c, positions 1–16	Match
Row-b contacts	none	omitted / unpopulated	Match
Signal contact drill	1.1 mm	Ø1.0 ±0.1 mm	At upper tolerance limit; acceptable but loose
Signal contact pad	1.65 mm round, A1 rectangular	no explicit pad diameter found	Not directly verifiable from available drawing text; annular ring with 1.1 mm drill is ~0.275 mm

Mounting / fixing holes

Table

Footprint feature	Current footprint	Official drawing	Result
MH1 center	+5.260 mm, +2.54 mm	likely +5.08 mm, +2.54 mm using A1-at-origin convention	Mismatch: +0.18 mm outward
MH2 center	−43.360 mm, +2.54 mm	likely −43.18 mm, +2.54 mm using A1-at-origin convention	Mismatch: −0.18 mm outward
MH1–MH2 spacing	48.62 mm	48.26 ±0.05 mm	Mismatch: +0.36 mm, outside tolerance
Mounting drill	2.9 mm	Ø2.8 +0.1 mm	At upper tolerance limit; likely acceptable if clearance is desired
Mounting pad	4.35 mm	no explicit pad diameter confirmed	Not directly verifiable

Footprint verdict

The 32 signal-contact pattern matches the datasheet/drawing geometry.
The mounting-hole spacing appears incorrect: current spacing is 48.62 mm, while the official drawing extraction gives 48.26 ±0.05 mm.
Recommended correction, assuming A1 is the footprint origin at x=0 and A16 is at x=−38.10 mm: set MH1 to (5.08, 2.54) and MH2 to (−43.18, 2.54).
Contact drill and mounting drill are both at the upper end of the official hole tolerances; this may be acceptable for assembly clearance but should be an intentional choice.

Key Mismatches / Action Items

Mounting hole X spacing mismatch — high priority. Current MH spacing is 48.62 mm vs. official 48.26 ±0.05 mm. Correct MH1/MH2 X coordinates before relying on the footprint mechanically.
Pin metadata incomplete — medium priority. Add pin descriptions for A/C contacts and set signal contacts to Passive/Bi-Directional.
Mounting-hole metadata incomplete — medium priority. Mark MH1/MH2 as mechanical/fixing holes or document intended electrical behavior.
Pad diameters not fully verified — low/medium priority. Signal contact drill and mounting drill are within/at the upper end of drawing tolerances, but pad diameters were not explicitly verified against the official drawing text extraction.

Overall Conclusion

The part metadata and basic connector identity are correct for HARTING 09231326921, a DIN 41612 Type 2C, 32-contact, right-angle male connector with rows a and c populated. The schematic terminal count and signal-contact footprint pattern match the datasheet. The main issue is the footprint mounting-hole center spacing, which appears 0.36 mm too wide compared with the official HARTING product drawing; pin descriptions and electrical pin types are also incomplete.

Scope
Current Flux Part Metadata
Datasheet / Official Source Summary
Schematic Symbol Cross-Check
Passes
Issues / mismatches
Footprint Cross-Check
Contact array
Mounting / fixing holes
Footprint verdict
Key Mismatches / Action Items
Overall Conclusion