HARTING Part Review
Worked for 1 min 2 sec
The part already has a Datasheet URL set, so I’ll use that source and skip the web-update step unless the datasheet tool cannot read it.
Worked for 13 mins 36 sec
Created a project doc
Part Information Review — HARTING 09231326921
Date: 2026-07-21 Reviewed project-level part metadata, schematic terminal definitions, PCB footprint geometry, and available datasheet/produ...
Completed the part review and created the detailed report: Part Information Review — HARTING 09231326921. The Datasheet URL was already set, so I did not change it; the key issue found is the footprint mounting-hole spacing: current 48.62 mm vs. official 48.26 ±0.05 mm.
Open items:
- Correct MH1/MH2 X coordinates before relying on the footprint mechanically.
- Add pin descriptions and set connector pins to Passive/Bi-Directional.
- Clarify MH1/MH2 as mechanical/fixing holes unless electrically intentional.
Suggested next steps:
- Fix the mounting-hole coordinates.
- Update pin descriptions/types.
- Re-run a footprint/symbol verification after edits.
Fix and verify
Fix mounting holes
Update pin metadata
Clarify mounting holes
Run final review
