Review all available part information (MPN, packag...

C

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll inspect the part metadata, find and set the official datasheet URL if missing, then compare symbol/footprint/pins against the datasheet and report mismatches.

flux

The project search shows a Molex URL, but the datasheet extractor reports no machine-visible Datasheet URL on the part, so I’m verifying the official source and will set the visible Datasheet URL property where the project tools allow it.
Created a project doc

Part Datasheet Review — Molex 874271002

View Document
Reviewed available part information in project CONN_010P_000C_1, set the machine-visible Datasheet URL, and cross-checked the schematic term...

flux

Completed the datasheet review and set the part’s Datasheet URL to the official Molex product PDF. I created the detailed report here: Part Datasheet Review — Molex 874271002.
Key flags: project MPN is CONN_010P_000C_1 but the official Molex MPN is 874271002; pin descriptions/types are missing/unspecified; footprint pitch and numbering match, but the drill is slightly larger than Molex’s Ø1.80 ±0.05 mm recommendation.
Fix metadata and verify
Fix part metadata
Clean pin properties
Correct drill size
Run ERC/DRC
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Terminal Order
1
1
Unspecified
Terminal
2
2
Unspecified
Terminal
3
3
Unspecified
Terminal
4
4
Unspecified
Terminal
5
5
Unspecified
Terminal
6
6
Unspecified
Terminal
7
7
Unspecified
Terminal
8
8
Unspecified
Terminal
9
9
Unspecified
Terminal
10
10
Unspecified
Terminal

0874271002