I’ll inspect the part metadata, find and set the official datasheet URL if missing, then compare symbol/footprint/pins against the datasheet and report mismatches.

The project search shows a Molex URL, but the datasheet extractor reports no machine-visible Datasheet URL on the part, so I’m verifying the official source and will set the visible Datasheet URL property where the project tools allow it.

Completed the datasheet review and set the part’s Datasheet URL to the official Molex product PDF. I created the detailed report here: Part Datasheet Review — Molex 874271002.

Key flags: project MPN is CONN_010P_000C_1 but the official Molex MPN is 874271002; pin descriptions/types are missing/unspecified; footprint pitch and numbering match, but the drill is slightly larger than Molex’s Ø1.80 ±0.05 mm recommendation.