Part Audit Review

C

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official datasheet if needed, update its Datasheet property, then compare the symbol, footprint, and pin descriptions against the manufacturer documentation.

flux

The part already has a SCHURTER datasheet URL, so no URL insertion is currently needed. I’m validating that document and checking the two-terminal symbol and SMD land pattern against it.
Created a project doc

Part Audit — SCHURTER 0031.8225

View Document
Reviewed the available part metadata, schematic terminals, PCB footprint, and stored datasheet for the SCHURTER OGN-SMD 5 × 20 mm fuseholder...

flux

Audit complete. The official SCHURTER datasheet was already set, so no Datasheet property update was required; the critical footprint geometry matches the recommended 6 × 6 mm pads with an 11 mm gap.
Flagged issues include blank Part Type, unconventional U prefix, unspecified terminal types/descriptions, HTTP rather than HTTPS datasheet URL, and apparently displaced silkscreen/reference graphics. Full specifications and findings are in Part Audit — SCHURTER 0031.8225.
Fix metadata and graphics
Correct part metadata
Improve terminal data
Clean footprint graphics
Run ERC/DRC check
Sign up to send

Files

Pins

Symbol

Layout

Preview

1
Pin Number
1
2
Pin Number
2

0031.8225