BQ25185 Charger Topology
Worked for 6 mins 20 sec
Created a project doc
Phase 8 — Power Passives Qualification for JLCPCB
State: BENCH_ONLY / NOT FOR FABRICATION / NOT FOR ENERGIZATION Scope: Sourcing and qualification only. No schematic, PCB, BOM, placement, ro...
Phase 8 completed without schematic, PCB, BOM, placement, or routing changes.
- C5 approved for schematic: Murata
GRM21BR61E106KA73L, LCSCC84416. - R9 and remaining capacitors have exact candidates but remain pending pulse-energy or DC-bias validation.
- The exact C14/C15 option is out of stock; an available 10 V X7R candidate is documented.
BENCH_ONLY / NOT FOR FABRICATION / NOT FOR ENERGIZATION.
Thought for 6 sec
I’ll read the attachment and follow only its authorized scope for the current BENCH_ONLY project.
Worked for 2 mins 22 sec
Fase 9 quedó parcialmente investigada antes de agotarse los ACUs.
Completado:
- Extraje requisitos oficiales para C2, C4/C6, C8/C9, C12 y C13/C14.
- Confirmé que C12 ofrece aproximadamente 15.54 µF efectivos a 5 V, suficiente frente al mínimo calculado LM5164 de 3.1 µF.
- Identifiqué que C15 está conectado a
RX_3V3, pero el requisito TI de 22 µF corresponde a VDDR, por lo que su función debe revisarse.
Pendiente:
- Obtener curvas oficiales numéricas de DC-bias para C2, C13 y C14/C15.
- Emitir los veredictos finales por designador.
- Crear el reporte Fase 9 y actualizar las notas de sourcing.
No se modificaron esquema, PCB, BOM, placement ni routing. BENCH_ONLY / NOT FOR FABRICATION / NOT FOR ENERGIZATION.
Resume Fase 9
Create report
Review C15 connection
