The NE555 devices are precision timing circuits capable of producing accurate time delays or oscillation. In time-delay or monostable operating modes, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle are controlled independently with two external resistors and a single external capacitor. Each timer has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage pin (CONT). When the trigger input (TRIG) is less than the trigger level, the flip-flop is set and the output goes high. If TRIG is greater than the trigger level and the threshold input (THRES) is greater than the threshold level, the flip-flop is reset and the output is low. The reset input (RESET) overrides all other inputs and is used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the output is low, a lowimpedance path is provided between the discharge pin (DISCH) and the ground pin (GND). Tie all unused inputs to an appropriate logic level to prevent false triggering. The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5V supply, output levels are compatible with TTL inputs. Features - Timing from microseconds to hours - Astable or monostable operation - Adjustable duty cycle - TTL-compatible output can sink or source up to 200mA - On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. Applications - Pulse-shaping circuits - Missing-pulse detectors - Pulse-width modulators - Pulse-position modulators - Sequential timers - Pulse generators -F requency dividers - Industrial controls

A monolithic, low voltage, 16-bit constant current LED sink driver. The device contains a 16-bit shift register and data latches, which convert serial input data into parallel output format. In the output stage sixteen regulated current generators provide 5 mA to 90 mA constant current to drive LEDs. The current is externally adjusted through a resistor. LED brightness can be adjusted from 0% to 100% via OE pin.

10 Ohms ±1% 10W Through Hole Resistor Axial Moisture Resistant Wirewound RS01010R00FE73 is a surface-mount, low-ohmic current sense resistor designed for precision current measurement and power management applications. It features a robust metal element construction that provides excellent thermal stability, low inductance, and high accuracy. This component is commonly used in power supplies, battery management systems, motor control circuits, and DC-DC converters where accurate current sensing is critical. Key Features Ultra-low resistance value for current sensing applications High power rating in compact SMD package Tight tolerance for precision measurement Low temperature coefficient for stable performance Excellent pulse handling capability RoHS compliant and lead-free Electrical Characteristics Resistance Value: 0.010 Ω (10 mΩ) Tolerance: ±1% Power Rating: 1 W Temperature Coefficient (TCR): ±75 ppm/°C (typical) Operating Temperature Range: -55°C to +155°C Mechanical Characteristics Package Type: Surface Mount (SMD) Package Size: 2512 (approx. 6.3 mm × 3.2 mm) Construction: Metal strip / metal element Termination: Nickel barrier with matte tin plating Performance Characteristics Low parasitic inductance for high-frequency applications High thermal conductivity for efficient heat dissipation Stable resistance over temperature and load conditions Suitable for high current measurement Applications Current sensing in power supplies Battery management systems (BMS) Motor control and drive circuits DC-DC converters Automotive electronics #CommonPartsLibrary #Resistor #THT #Axial

A 3 terminal variable resistor in which the resistance is manually varied to control the flow of electric current. Acts as an adjustable voltage divider.

This project is a Lithium-ion battery charger circuit utilizing the MCP73831 integrated circuit. It includes input and output connectors, a charging current programming resistor, decoupling capacitors, and a charge status indicator LED. The design can deliver up to 500mA charge current. #project #Template #charger #referenceDesign #batterycharger #template #bms #microchip

36.5 kOhms ±0.1% 0.063W, 1/16W Chip Resistor 0603 (1608 Metric) Anti-Sulfur, Automotive AEC-Q200 Thin Film The RGT1608P-3652-B-T5 is a precision surface-mount thick film chip resistor in a 0603 (1608 metric) package. It is designed for applications requiring tight tolerance and stable temperature performance. The component is suitable for high-accuracy circuits such as instrumentation, signal conditioning, and precision voltage division. Key Features Compact 0603 (1608 metric) SMD package High precision ±0.1% tolerance Low temperature coefficient Stable performance over wide temperature range Compatible with standard reflow soldering RoHS compliant and lead-free Electrical Characteristics Resistance Value: 36.5 kΩ Resistance Tolerance: ±0.1% (B) Temperature Coefficient: ±25 ppm/°C (typical) Rated Power: 0.1 W (1/10 W) Maximum Working Voltage: 75 V Maximum Overload Voltage: 150 V Mechanical Characteristics Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: ~0.45 mm Environmental Specifications Operating Temperature Range: -55°C to +155°C Moisture Sensitivity Level: MSL 1 Thermal Shock: Meets standard IEC requirements Packaging Information Packaging Type: Tape and Reel (T5) Reel Quantity: Typically 5,000 pieces per reel Applications Precision analog circuits Voltage dividers Signal conditioning Measurement and instrumentation systems Industrial and consumer electronics #CommonPartsLibrary #Resistor

This project is a Lithium-ion battery charger circuit utilizing the LTC4054 integrated circuit. It includes input and output connectors, a charging current programming resistor, decoupling capacitors, and a charge status indicator LED. The design can deliver up to 800mA charge current. #project #Template #charger #reusable #module #batterycharger #template #bms #analog

This project is a Lithium-ion battery charger circuit utilizing the STC4054 integrated circuit. It includes input and output connectors, a charging current programming resistor, decoupling capacitors, and a charge status indicator LED. The design can deliver up to 800mA charge current. #project #Template #charger #reusable #module #batterycharger #template #bms #STC4054 #stm

High Voltage, Bidirectional, Zero-Drift, Current-ShuntMonitor With Integrated, 2-mΩ, Precision, Low Inductive Shunt Resistor, TSSOP-20 shunt current amplifier bidirectional TSSOP*4.4x6.5mm*P0.65mm*

10 ohm, Through-Hole Power Resistor, Ceramic Composition, .5 W, 10 %, +/-1300 ppm/C, Axial-Leaded, Copper Termination, 9 x 3.5 mm, CGS CCR

High Power Chip Resistor (Wide Terminal type), 0612 Panasonic ERJ-B2AF562V

High Power Chip Resistor (Wide Terminal type), 0612 Panasonic ERJ-B2AF682V

High Power Chip Resistor (Wide Terminal type), 0612 Panasonic ERJ-B2AF513V

High Power Chip Resistor (Wide Terminal type), 0612 Panasonic ERJ-B2AJ563V

High Power Chip Resistor (Wide Terminal type), 0612 667-ERJ-B2AF100V https://www.mouser.co.uk/ProductDetail/Panasonic/ERJ-B2AF100V?qs=%2FtUKp9Y%252BE7vnK1vynM5wVA%3D%3D Panasonic ERJ-B2AF100V

5 GOhms ±5% 1.5W Chip Resistor Nonstandard High Voltage Thick Film #commonpartslibrary #resistor #chipresistor