2 Position Wire to Board Terminal Block Horizontal with Board 0.100" (2.54mm) Through Hole 1725656 – PCB-mounted screw terminal block designed for secure wire-to-board connections in industrial, control, automation, instrumentation, and power distribution applications. Features a screw-clamp termination system that provides reliable electrical contact and strong wire retention under vibration and demanding operating conditions. The through-hole construction offers enhanced mechanical stability, making it suitable for long-term field installations and high-reliability electronic assemblies. Designed to simplify wiring, maintenance, and system integration while ensuring dependable signal and power connectivity. #TerminalBlock #ScrewTerminal #WireToBoard #IndustrialElectronics #PowerDistribution #AutomationSystems #ControlPanels #ThroughHoleConnector #PCBConnector #ReliableConnectivity #connector #Terminalblock #tht

4 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole 691137710004 is a 4-position wire-to-board terminal block from the WR-TBL Series 1377 by Würth Elektronik. It features a horizontal side-entry design with a 5.00 mm pitch and through-hole PCB mounting, making it suitable for industrial controls, power distribution, automation equipment, and general-purpose PCB wire connections. The pressure-clamp screw terminal design provides secure wire retention and reliable electrical performance. Key Features 4-position wire-to-board terminal block 5.00 mm pitch spacing Horizontal (side-entry) wire connection Through-hole PCB mounting Pressure-clamp screw termination with wire guard Supports 12–30 AWG wire sizes Rated for up to 16 A current Rated for up to 300 V Operating temperature range: -30°C to +120°C Polycarbonate (PC) housing for durability Copper alloy contacts with nickel plating M2.5 screw thread with 0.4 Nm recommended tightening torque Green housing color for standard industrial identification #TerminalBlock #WireToBoard #WurthElektronik #PCBConnector #ScrewTerminal #IndustrialConnector #ThroughHole #WRTBL #PowerConnection #ElectronicsDesign #commonpartslibrary #connector #terminalblock

JST XH Connector Header Through Hole 2 position 0.098" (2.50mm) Connector header for wire-to-board interconnection, providing a 2-position through-hole interface for mating with JST XH Series crimp housings. It features a 2.50 mm pitch, a rated current of 3 A AC/DC, a rated voltage of 250 V AC/DC, and supports conductors from AWG 30 to AWG 22 when used with the specified mating contacts. #Connector #WireToBoard #Header #ThroughHole #2Position #2_50mmPitch #JST #XHSeries

Connector header for wire-to-board interconnection, providing a 2-position, side-entry surface-mount interface compatible with the JST PH Series 2.0 mm pitch connector system. It is rated for 100 V AC/DC and 2 A, and features a shrouded right-angle SMT design with hold-down solder tabs for PCB mounting. #Connector #WireToBoard #Header #JST #PHSeries #2mmPitch #SMT #RightAngle #2Position #100V #2A

4-Position Through-Hole Male Pin Header – Single-row vertical PCB header designed for board-to-board interconnects, wire-to-board connections, industrial control systems, embedded electronics, instrumentation, prototyping, and general-purpose electronic applications. The Samtec TSW-104-07-G-S is part of the TSW Series, featuring 4 male pins on a 2.54 mm (0.100") pitch with a through-hole vertical mounting configuration. It utilizes square phosphor bronze contacts with 10 µin (0.25 µm) gold plating on the mating surface and gold-plated posts for excellent conductivity, corrosion resistance, and long-term reliability. The connector features a 0.230 in (5.84 mm) mating pin length, 0.100 in (2.54 mm) post length, push-pull mating, and a black UL94 V-0 PBT insulator. Rated for up to 5.7 A per contact (application dependent) and suitable for operation over a −55°C to +125°C temperature range, it is ideal for rugged industrial and embedded system designs. #Samtec #TSW10407GS #TSWSeries #MaleHeader #PinHeader #ThroughHoleConnector #BoardToBoard #254mmPitch #IndustrialElectronics #EmbeddedSystems #PCBConnector

2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2.5/ 2-G-5.08 CAN connector terminal block 2 pin PCB header for providing a pluggable wire-to-board connection in the COMBICON MSTB 2.5 system. It features 2 positions with a 5.08 mm pitch, a nominal current rating of 12 A, a rated voltage of 320 V (III/2), tin-plated contacts, linear pin layout, and through-hole wave-solder mounting with the plug-in direction parallel to the PCB. #Connector #TerminalBlock #PCBHeader #ThroughHole #PhoenixContact #COMBICON

2 Position Wire to Board Terminal Block Horizontal with Board 0.150" (3.81mm) Through Hole ## Engineering Specification ## General Description The **1727010** is a Phoenix Contact **MKDS series PCB terminal block** designed for secure wire-to-board electrical connection in printed circuit board assemblies. It provides a compact screw-clamp termination interface for connecting external conductors to PCB circuitry. The component is suitable for industrial electronics, automation equipment, control modules, power interfaces, instrumentation, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1727010** Manufacturer: **Phoenix Contact** Product Name: **MKDS 1/ 2-3,81** Product Series: **MKDS** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed PCB terminal block that allows external wires to connect directly to the printed circuit board. The screw-clamp mechanism provides both mechanical conductor retention and electrical continuity between the field wiring and PCB circuit. This makes the component suitable for applications where wiring must be secure, serviceable, and accessible during installation or maintenance. ## Mechanical Description The terminal block uses a compact housing with side-entry conductor access and through-hole solder pins for stable PCB attachment. Its construction supports organized wire routing and practical access for conductor insertion and screw tightening. The design is suitable for compact board layouts where reliable field wiring connection is required. ## Electrical Description The component is intended for signal and low-voltage power connection applications within the manufacturer’s specified electrical ratings. It provides stable electrical contact when used with compatible conductor sizes, correct wire preparation, and proper screw tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements that transfer current from the inserted conductor to the soldered PCB pins. The screw connection with tension sleeve helps maintain reliable contact pressure and secure conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1727010** is intended for through-hole solder mounting on a printed circuit board. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidance. The component should be positioned to allow safe wire insertion, screwdriver access, and adequate clearance from nearby components or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, power supply interfaces, relay boards, instrumentation equipment, sensor wiring interfaces, building control systems, communication hardware, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current requirement, voltage rating, tightening torque, creepage and clearance spacing, solder joint strength, wire routing, and service access. The terminal block should not be used beyond the manufacturer’s specified electrical, mechanical, or environmental limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkds #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole #CommonPartsLibrary #Connector #WireToBoard

Connector Header Panel Mount, Through Hole 12 position 0.230" (5.84mm) The 0194280015 is a wire-to-board rectangular header connector from Molex, part of the MX150L series. It is designed for high-reliability power and signal connections, particularly in automotive and industrial environments. This connector is a 12-position, dual-row, vertical (straight) male header that mounts through the PCB and mates with corresponding cable connectors. It features a sealed design (IP67 rated), making it suitable for harsh conditions such as dust, moisture, and vibration. Key Features Connector Type Wire-to-board male header (vertical / straight) Number of Positions 12 contacts (2 rows) Pitch 5.84 mm terminal pitch ~6.0 mm row spacing High Power Capability Up to ~18 A per contact (application dependent) Voltage rating up to 600V AC/DC Sealed / Rugged Design IP67 rated (dust-tight and waterproof) Suitable for harsh environments Mounting Type Panel mount / through-hole PCB soldering Locking Mechanism Locking ramp + polarization (keying) for secure mating Material & Construction Housing: Glass-filled PBT (UL94 V-0 flame rating) Contacts: Copper alloy with tin plating Durability Designed for automotive-grade reliability Typical mating cycles: ~25 cycles Operating Temperature Approximately -40°C to +125°C #CommonPartsLibrary #Connector #MX150L 19428

6-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for industrial controls, consumer electronics, appliances, power supplies, embedded systems, instrumentation, and general-purpose wire-to-board interconnect applications. The TE Connectivity 640456-6 is part of the MTA-100 Series, featuring 6 positions on a 2.54 mm (0.100") pitch with a through-hole vertical PCB mount. It utilizes square copper alloy contacts with tin plating, a single-wall polarized shroud, and a friction-lock mating system to ensure secure cable retention and proper orientation during assembly. Rated for 250 VAC (current rating depends on the mating wire gauge), it is constructed with a UL94 V-0 thermoplastic housing for durability and flame resistance. The connector operates over a −55°C to +105°C temperature range and is ideal for reliable board-to-wire connections in embedded and industrial electronic designs. #TEConnectivity #6404566 #MTA100 #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #254mmPitch #IndustrialElectronics #EmbeddedSystems #BoardToWire #Connector

1 Position Wire to Board Terminal Block Vertical with Board Through Hole #CommonPartsLibrary #Connector #Terminal-block #WireToBoard #COMBICON-FRONT

2-Position Horizontal Through-Hole Terminal Block – Single-level wire-to-board terminal block designed for industrial automation, power supplies, control systems, instrumentation, HVAC equipment, embedded electronics, and general-purpose PCB power connections. The Würth Elektronik 691137710002 is part of the WR-TBL Series 1377, featuring 2 positions on a 5.00 mm pitch with a horizontal (side-entry) wire orientation and through-hole PCB mounting. It utilizes a screw clamp with leaf spring and wire guard for secure wire retention, supporting 12–30 AWG conductors. Rated for 16 A and 300 V, it is constructed with nickel-plated copper alloy contacts, a zinc-plated M2.5 screw, and a polycarbonate (PC) housing. The terminal block has a recommended tightening torque of 0.4 Nm (3.5 lb-in) and operates over a −30°C to +120°C temperature range, making it suitable for reliable industrial and embedded power interconnections. #WurthElektronik #691137710002 #WRTBL1377 #TerminalBlock #WireToBoard #ScrewTerminal #ThroughHoleConnector #IndustrialAutomation #PowerSupply #EmbeddedSystems #PCBConnector #ControlSystems

3-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for consumer electronics, industrial controls, embedded systems, home appliances, IoT devices, instrumentation, and general-purpose wire-to-board interconnect applications. The JST B3B-PH-K-S is part of the PH Series, featuring 3 positions on a 2.00 mm (0.079") pitch with a through-hole vertical PCB mount. It utilizes brass square pins with tin plating, a 4-wall polarized shroud, and a detent locking mechanism for secure mating with compatible PH series crimp housings. Rated for 2 A and 100 V, it is constructed with a UL94 V-0 rated PA66 (Nylon 6/6) housing, providing reliable electrical and mechanical performance. The connector supports press-fit and solder termination, operates over a −25°C to +85°C temperature range, and is ideal for compact embedded and industrial board-to-wire applications. #JST #B3BPHKS #PHSeries #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #2mmPitch #BoardToCable #IndustrialElectronics #EmbeddedSystems #Connector

Jack Modular Connector 6p6c (RJ11, RJ12, RJ14, RJ25) 90° Angle (Right) Shielded Cat5 The 615006141121 is a board-to-board or wire-to-board connector component designed for reliable electrical interconnection in electronic assemblies. It is typically used in compact PCB layouts where secure mating, consistent contact performance, and durability are required. This connector is suited for applications in consumer electronics, industrial equipment, and embedded systems, offering dependable signal and power transmission. Key Features: Compact connector design for space-constrained applications High-reliability contact interface Designed for PCB mounting ապահով secure mating and retention Suitable for signal and low-power connections Mechanical Characteristics: Mounting Type: Through-hole or surface-mount (depending on variant) Orientation: Vertical or right-angle configuration Contact Configuration: Multi-position connector Pitch: Standard fine-pitch spacing typical for board-level connectors Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with plated finish Electrical Characteristics: Contact Resistance: Low contact resistance for stable signal integrity Insulation Resistance: High insulation resistance Rated Voltage: Suitable for low-voltage applications Current Rating: Designed for signal-level or moderate current carrying Environmental Characteristics: Operating Temperature Range: Suitable for standard industrial temperature ranges RoHS Compliance: Yes Durability: Designed for multiple mating cycles Applications: Embedded systems Consumer electronics Industrial control boards Communication devices PCB interconnect solutions #commonpartslibrary #connector #jackmodular

4 Position Wire to Board Terminal Block Vertical with Board 0.197" (5.00mm) Through Hole The WAGO 2604-3104 is a through-hole PCB terminal block designed for secure wire-to-board power and signal connections in industrial and commercial electronic equipment. It features WAGO Push-in CAGE CLAMP® spring connection technology with integrated lever actuation, allowing fast, tool-free wire insertion and removal. The connector is intended for reliable field wiring applications where vibration resistance, ease of maintenance, and compact PCB integration are required. Engineering Specification Manufacturer: WAGO Manufacturer Part Number: 2604-3104 Product Family: PCB Terminal Block Series: 2604 Connector Type: Wire-to-Board Terminal Block Mounting Style: Through-Hole PCB Mount Orientation: Vertical / Top Entry Number of Positions: 4 Pitch Spacing: 5.00 mm Connection Technology: Push-in CAGE CLAMP® Actuation Method: Lever Operated Wire Size Range: 24 AWG to 12 AWG Supported Conductors: Solid, stranded, and ferruled wires Rated Voltage: Up to 400 V IEC, 300 V UL Rated Current: Up to 32 A IEC, 20 A UL Operating Temperature Range: -60°C to +105°C Insulation Material: Polyamide PA66 Contact Material: Electrolytic Copper Contact Plating: Tin-Plated Spring Material: Chrome Nickel Spring Steel Flammability Rating: UL94 V-0 Color: Gray housing with orange lever PCB Contact Type: THT solder pins Application Areas: Industrial controls, power distribution, automation systems, instrumentation, and general PCB power interconnects. #commonpartslibrary #connector #terminalblock

Connector Header Through Hole 12 position 0.100" (2.54mm) The TSW-106-07-F-D is a double-row, through-hole vertical header from Samtec’s TSW series, designed for board-to-board or wire-to-board interconnections. It features a standard 2.54 mm pitch with 12 total contacts arranged in two rows of six positions. This connector is commonly used in prototyping, embedded systems, and general-purpose PCB applications where reliable and cost-effective interconnect solutions are required. Applications PCB prototyping Embedded systems Mezzanine board connections Development boards General-purpose interconnects Mating Compatibility Compatible with standard 2.54 mm pitch female headers and sockets Works with IDC connectors and jumper wires #commonpartslibrary #connector #header

Connector Header Through Hole 18 position 0.100" (2.54mm) # TSW-118-07-G-S ## General Description The TSW-118-07-G-S is a through-hole board-to-board and wire-to-board interconnect header manufactured by Samtec. It belongs to the TSW series of standard terminal strip headers designed for reliable signal transmission in electronic assemblies, embedded systems, industrial controls, telecommunications equipment, instrumentation, and general-purpose printed circuit board applications. The component features precision-machined contacts, robust mechanical construction, and compatibility with a wide range of mating connectors. Its design supports secure electrical connections while maintaining excellent durability during repeated mating cycles and long-term operation in demanding environments. ## Key Features ### Mechanical Characteristics * Through-hole mounting configuration * Single-row terminal strip header design * Straight vertical orientation * Precision-machined contact system * High-reliability board-level interconnection ### Contact System * Gold-plated contact surface * Enhanced conductivity and signal integrity * Corrosion-resistant contact finish * Suitable for repeated insertion and removal cycles ### Electrical Characteristics * Low contact resistance * Reliable signal transmission * Suitable for low-power and signal-level applications * Stable electrical performance across operating conditions ### Material Construction * High-temperature thermoplastic insulator * Durable metallic contact structure * RoHS-compliant materials * Lead-free manufacturing compatibility ### Environmental Characteristics * Industrial-grade operating capability * Resistant to mechanical wear during mating cycles * Suitable for automated and manual assembly processes ### Application Areas * Embedded Systems * Microcontroller Development Boards * Industrial Automation Equipment * Telecommunications Hardware * Test and Measurement Instruments * Medical Electronics * Data Acquisition Systems * Prototyping Platforms * Consumer Electronic Devices * PCB Interconnection Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industry-standard connector footprint ## Manufacturer Samtec Inc. ## Product Family TSW Series Terminal Strip Headers #Samtec #TSW11807GS #TerminalStripHeader #PCBConnector #BoardToBoardConnector #WireToBoardConnector #ElectronicsComponents #EmbeddedSystems #IndustrialElectronics #InterconnectSolutions #ThroughHoleConnector #ElectronicDesign #HardwareEngineering #PCBAssembly #CommonPartsLibrary #Connector #Header #TSW pin header 1x18 2.54mm

Connector Header Through Hole, Right Angle 10 position 0.100" (2.54mm) The 1761607-3 is a pluggable terminal block connector manufactured by TE Connectivity. It is designed for reliable wire-to-board connections in industrial and electronic applications. The connector supports screw-clamp termination, allowing secure and reusable wire connections. Its modular design enables easy installation and maintenance, making it suitable for control systems, power distribution, and signal interfacing. Key Features Pluggable terminal block connector Screw-clamp wire termination Reliable mechanical and electrical connection Modular and field-serviceable design Suitable for industrial environments Electrical Characteristics Rated voltage: up to 300 V (typical, application dependent) Rated current: up to 8 A (depending on wire size and conditions) Contact resistance: low contact resistance for stable conductivity Insulation resistance: high insulation resistance Mechanical Characteristics Number of positions: 3 Pitch: 3.5 mm Termination type: screw clamp Wire size range: typically 26 AWG to 16 AWG Mounting type: through-hole PCB Mating type: pluggable header interface Material Properties Housing material: high-temperature thermoplastic Contact material: copper alloy Contact plating: tin plating Flammability rating: UL94 V-0 Environmental Specifications Operating temperature range: −40°C to +105°C RoHS compliant Suitable for industrial applications Applications Industrial control systems Power supply connections Signal interface modules Automation equipment HVAC and building control systems Compliance & Standards RoHS compliant UL recognized (application dependent) IEC standard compliant terminal block design #commonpartslibrary #connector #header

Connector Header Panel Mount, Through Hole, Right Angle 2 position 0.215" (5.46mm) Deutsch DT 2-position connector DT13-2 style DT13-2P is a 2-position, right-angle wire-to-board PCB header from the DEUTSCH DT Series by TE Connectivity. It is designed for rugged automotive, industrial, heavy equipment, and off-road applications where reliable power and signal connections are required. The connector features a sealed interface, through-hole solder termination, and a durable housing that withstands harsh environments, including vibration, moisture, and extreme temperatures. Key Features: 2-position right-angle PCB header DEUTSCH DT sealed connector system Through-hole solder termination 5.46 mm (0.215 in) pitch Rated up to 13 A contact current Maximum operating voltage of 250 VAC/VDC Operating temperature range: -55°C to +125°C Nickel-plated contacts for corrosion resistance Suitable for both power and signal applications Rugged design for automotive and industrial environments #CommonPartsLibrary #Connector #DT13-2P #TEConnectivity #DeutschDT #PCBHeader #WireToBoard #SealedConnector #AutomotiveConnector #IndustrialConnector #ThroughHole #RightAngleConnector #PowerConnector #SignalConnector

Dip Switch SPST 2 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-2LPSTJ is a two-position pluggable terminal block connector designed for secure wire-to-board connections in industrial and commercial electronic applications. It features a screw-clamp termination mechanism, allowing reliable and reusable connections for solid or stranded wires. The connector is typically used in power distribution, control systems, and signal wiring where ease of maintenance and field wiring is required. Key Features Pluggable terminal block, two positions Screw-clamp wire termination for secure connection Standard pitch suitable for common PCB layouts Removable plug for easy installation and maintenance Designed for solid and stranded wire compatibility High reliability for industrial environments Mechanical Specifications Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole (header) with mating plug Wire Entry: Side entry Wire Gauge Range: Typically 24 AWG to 12 AWG (manufacturer dependent) Housing Material: High-temperature thermoplastic Color: Typically green Electrical Specifications Rated Voltage: Up to 300 V (UL rating typical) Rated Current: Up to 10–15 A (depending on wire size and conditions) Contact Resistance: Low resistance, suitable for power and signal transmission Insulation Resistance: High insulation resistance under standard conditions Environmental Specifications Operating Temperature Range: −40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Power supply connections Industrial control systems HVAC equipment Automation and instrumentation PCB-based terminal interfaces Mating / Compatibility Compatible with corresponding 2-position pluggable terminal block headers with 5.08 mm pitch Designed for repeated mating cycles without degradation #commonpartslibrary #switch #dip #spst

2 Position Wire to Board Terminal Block Horizontal with Board 0.236" (6.00mm) Surface Mount 2061-602/998-404 is a 2-position surface-mount (SMT) PCB terminal block from WAGO's 2061 Series, designed for reliable wire-to-board power and signal connections. It utilizes WAGO's Push-button CAGE CLAMP® spring connection technology, allowing fast, tool-assisted wire insertion and secure vibration-resistant termination without screws. Its compact low-profile design makes it suitable for LED lighting, industrial controls, building automation, and space-constrained electronic assemblies. Key Features 2-position wire-to-board terminal block Surface-mount (SMT) PCB mounting Push-button CAGE CLAMP® spring termination (screwless) 6.00 mm pitch Supports 16–20 AWG (0.5–1.5 mm²) wire Rated up to 10 A (application dependent) Rated voltage up to 300 V (UL) / 630 V (IEC) Horizontal wire entry Tin-plated copper alloy contacts for excellent conductivity Operating temperature: -60°C to +105°C Glass-filled PPA housing with high mechanical strength Ideal for LED lighting, industrial automation, power distribution, and compact PCB applications. #WAGO #TerminalBlock #WireToBoard #SMT #PushButton #CAGECLAMP #PCBConnector #LightingConnector #IndustrialAutomation #PowerConnection