The ESP32-C3FH4 is a highly integrated wireless microcontroller designed for Internet of Things, smart devices, industrial automation, consumer electronics, and embedded connectivity applications. It combines a low-power RISC-V processor with integrated Wi-Fi and Bluetooth Low Energy connectivity, providing a cost-effective and secure platform for wireless communication and edge computing. The device incorporates embedded flash memory, advanced security features, low-power operating modes, and a rich set of peripheral interfaces, making it suitable for battery-powered and always-connected systems. Its compact design and comprehensive software ecosystem enable rapid development of connected products while maintaining high reliability and energy efficiency. The ESP32-C3FH4 is widely used in smart sensors, home automation devices, wearable electronics, industrial monitoring systems, wireless control modules, and cloud-connected embedded products. Features Integrated RISC-V microcontroller core Built-in Wi-Fi connectivity Integrated Bluetooth Low Energy support Embedded flash memory Low-power operation for battery-powered applications Hardware cryptographic acceleration Secure boot capability Flash encryption support Multiple GPIO interfaces Integrated UART, SPI, I²C, I²S, PWM, and ADC peripherals Real-time processing capability Wireless networking and cloud connectivity support OTA firmware update support Compact surface-mount package Industrial-grade reliability Electrical Characteristics Wireless microcontroller architecture Integrated RF subsystem Low-power operating modes High-performance embedded processing Secure communication support Multi-protocol wireless connectivity Flexible peripheral expansion capability Optimized power consumption for IoT devices Applications Internet of Things devices Smart home automation Wireless sensor networks Industrial monitoring systems Asset tracking devices Wearable electronics Smart appliances Remote control systems Data acquisition platforms Edge computing applications Connected consumer products Embedded wireless gateways Package Information Surface-mount package Compact footprint for embedded applications Suitable for automated assembly processes Optimized thermal and electrical performance PCB-friendly package design #commonpartslibrary #integratedcircuit #microcontroller #wirelessconnectivity #wifi #bluetoothlowenergy #iot #embeddedsystems #espressif #smartdevices #industrialautomation #edgecomputing #wirelessmodule #internetofthings #electronicsdesign #riscv #embeddedelectronics #lowpowerdesign

Cellular, Navigation BeiDou, EGDE, Galileo, GLONASS, GPS, GNSS, GSM, LTE Transceiver Module 850MHz, 900MHz, 1.8GHz, 1.9GHz Antenna Not Included Surface Mount The BG95M3LA-64-SGNS is a compact low-power LTE cellular communication module designed for IoT, telematics, asset tracking, industrial automation, and embedded wireless applications. The module supports global LTE Cat M1, Cat NB2, and EGPRS connectivity, enabling reliable wide-area wireless communication for battery-powered and mobile embedded systems. The device integrates cellular modem functionality, GNSS positioning capability, power management features, and multiple peripheral communication interfaces within a highly compact surface-mount package optimized for space-constrained embedded designs. The module is engineered for low-power operation, making it suitable for long-life IoT deployments requiring efficient wireless connectivity. The BG95M3LA-64-SGNS supports integrated satellite positioning technologies including GPS, GLONASS, Galileo, and BeiDou for location-aware applications. Its robust RF performance and industrial-grade operating capability allow deployment in harsh environmental conditions and demanding remote monitoring systems. The module provides comprehensive support for embedded communication protocols and is commonly used in smart meters, telematics units, industrial gateways, environmental monitoring systems, fleet tracking devices, and connected sensor platforms. Key Features LTE Cat M1 cellular communication support LTE Cat NB2 narrowband IoT capability EGPRS fallback connectivity Integrated GNSS positioning functionality Low-power optimized architecture Global wireless network compatibility Compact surface-mount module design Embedded TCP/IP protocol stack support UART, USB, and serial communication interfaces Integrated power management subsystem Industrial operating temperature support Embedded IoT connectivity optimization High-reliability wireless communication platform Multi-constellation satellite navigation support Electrical Characteristics Low operating power consumption Wide input voltage support High RF sensitivity performance Embedded low-power sleep functionality Stable wireless communication architecture Integrated RF and baseband processing Optimized antenna interface support Industrial-grade reliability performance Fast network registration capability Applications IoT and M2M communication systems Asset tracking devices Fleet management platforms Smart utility metering Industrial automation equipment Remote environmental monitoring Smart agriculture systems Telematics and transportation electronics Portable wireless data terminals Embedded gateway systems Smart city infrastructure Connected sensor platforms Package Information Package Type: LGA Module Mounting Type: Surface Mount Compact embedded wireless module package RoHS compliant configuration available #commonpartslibrary #wirelessmodule #lte #iot #embeddedhardware #cellularcommunication #gnss #telematics #industrialautomation #assettracking

8 Position Card Connector Micro SIM Surface Mount, Right Angle Gold ## Engineering Specification ## General Description The **693022010811** is a Würth Elektronik **WR-CRD Micro SIM card connector** designed for compact electronic devices requiring secure SIM card retention and reliable board-level electrical connection. It is intended for surface-mount printed circuit board assembly and is suitable for communication modules, wireless devices, embedded systems, IoT hardware, and networking equipment. The connector uses a hinged lid mechanism to hold the Micro SIM card in place during operation. ## Device Identification Manufacturer Part Number: **693022010811** Manufacturer: **Würth Elektronik** Product Series: **WR-CRD** Device Category: **Connector and Interconnect Component** Device Type: **Micro SIM Card Connector** Connector Style: **Hinge Type** Mounting Type: **Surface Mount, Right Angle** ## Functional Description The device functions as a board-mounted Micro SIM card interface. It provides mechanical retention and electrical contact between the SIM card and the host printed circuit board. The hinged lid design allows the SIM card to be placed into the connector and secured during operation, helping maintain contact stability in compact electronic assemblies. ## Mechanical Description The connector is designed with a low-profile surface-mount construction suitable for space-constrained PCB layouts. It uses a hinged card-retention mechanism and is intended for horizontal or right-angle card installation. The mechanical structure supports reliable insertion, retention, and removal of the Micro SIM card during normal use. ## Electrical Description The connector is intended for signal-level SIM card interface applications. It provides multiple gold-plated contact positions for stable electrical connection between the SIM card and the host circuit. The device should be used within the manufacturer’s specified voltage, current, contact resistance, and insulation limits. ## Material and Contact Description The connector uses copper alloy contacts with gold plating for reliable signal transfer and corrosion resistance. The housing and mechanical retention structure are designed for surface-mount assembly and repeated card handling within the rated operating conditions. ## Mounting and Assembly Description The component is suitable for automated surface-mount PCB assembly. Proper land pattern design, soldering profile control, and mechanical clearance should be followed according to the manufacturer’s recommended layout and assembly guidance. The PCB design should provide stable grounding, correct pad alignment, and adequate clearance for SIM card insertion and lid operation. ## Application Suitability The **693022010811** is suitable for cellular communication devices, IoT modules, wireless routers, embedded modems, tracking systems, smart meters, industrial communication equipment, portable electronics, and other products requiring a Micro SIM card interface. ## Design Considerations The connector should be placed in an accessible area of the PCB to allow SIM card installation and removal. Designers should avoid excessive mechanical stress on the hinged lid, improper solder joint loading, contamination of the contact area, and operation beyond the specified environmental and electrical ratings. ## Hashtags #commonpartslibrary #connector #simconnector #microsimconnector #wurthelektronik #wrcrd #cardconnector #memoryconnector #interconnect #pcbconnector #surfacemount #rightangleconnector #smtcomponent #goldplatedcontacts #embeddedhardware #iotdevices #wirelessmodules #communicationdevices #networkingequipment #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

67 Position Female Connector M.2 (NGFF) Mini Card Gold 0.020" (0.50mm) Black # Engineering Specification ## Product Name 2199230-4 ## General Description 2199230-4 is a surface mount board-edge connector designed to support standardized M.2 module interfaces, specifically configured for Key E applications used in wireless communication, embedded computing, and high-speed peripheral expansion systems. The component provides a reliable mechanical and electrical interface between a host printed circuit board and a removable or fixed M.2 module. The connector is engineered to accept gold-finger edge contacts from an M.2 module, enabling secure signal transmission for high-speed data communication, power delivery, and control signaling. Its design supports stable mechanical retention, precise alignment, and consistent electrical contact performance under repeated mating cycles. This component is widely used in industrial computing platforms, telecommunications equipment, IoT devices, and embedded system architectures where modular expansion and standardized connectivity are required. It enables flexible system design by allowing interchangeable M.2 modules for wireless communication, storage, and specialized processing functions. The design emphasizes signal integrity, mechanical durability, and compatibility with high-density PCB layouts. It is suitable for applications requiring robust high-frequency performance and reliable long-term mechanical stability. ## Functional Requirements ### Module Interface The connector shall provide a standardized interface for M.2 Key E module insertion and electrical connection. ### Signal Transmission The connector shall support high-speed electrical signal routing between host systems and M.2 modules. ### Mechanical Retention The connector shall securely retain inserted modules under vibration and operational stress conditions. ### System Modularity The connector shall enable modular expansion and replacement of functional M.2 devices within host systems. ## Electrical Requirements ### Contact Performance The connector shall provide stable electrical contact between gold-finger module pads and host PCB terminals. ### Signal Integrity The design shall support high-frequency signal transmission with minimal loss and interference. ### Power Delivery The connector shall support regulated power distribution to installed M.2 modules. ### Low Resistance Path The electrical interface shall maintain low contact resistance for reliable long-term operation. ## Mechanical Requirements ### Board Edge Mounting The connector shall be mounted on a printed circuit board to accept edge-insertion M.2 modules. ### Alignment and Fit The design shall ensure precise alignment between module contacts and connector terminals. ### Durability The connector shall withstand repeated module insertion and removal cycles without performance degradation. ### Structural Stability The assembly shall maintain mechanical integrity under vibration and operational stress conditions. ## Environmental Requirements ### Operating Conditions The connector shall operate reliably in industrial, commercial, and embedded system environments. ### Thermal Performance The device shall maintain mechanical and electrical stability under elevated operating temperatures. ### Storage and Handling The component shall retain structural and functional integrity during storage, transportation, and assembly processes. ## Quality Requirements ### Reliability The connector shall provide consistent electrical and mechanical performance throughout its operational lifetime. ### Verification Mechanical retention, contact resistance, and signal integrity shall be validated through appropriate qualification testing. ### Compliance The product shall conform to applicable standards governing M.2 interface connectors and high-speed board-edge interconnect systems. ## Documentation Requirements Technical documentation shall include footprint layout guidance, mating interface specifications, signal routing recommendations, mechanical keep-out regions, and application guidelines for M.2 system integration. ## Classification Tags #21992304 #M2Connector #M2KeyE #EdgeCardConnector #GoldFingerInterface #HighSpeedConnector #BoardEdgeConnector #WirelessModuleConnector #PCIeInterface #NGFF #EmbeddedSystems #IoTHardware #TelecomHardware #PCBDesign #MechanicalConnector #SignalIntegrity #HighFrequencyDesign #CommonPartsLibrary #ComponentLibrary #EngineeringSpecification #SystemIntegration #HardwareDesign #TEConnectivity #ModuleInterface #BoardToModule