This project involves designing a PCB for the lid assembly of an open-source laptop. The design integrates various sensors, including a microphone, camera, and ambient light sensor, ensuring precise alignment with the display glass. It features touch sensors to control LED lighting, spring-loaded contacts for touch-key interaction, and 3D-printed light diffusers for efficient lighting. Additionally, the PCB includes a power management system with status LEDs and a PFC for connecting to the external laptop PCB. The goal is to create a versatile, upgradeable, and user-friendly component for the laptop's lid. Specific parts of the project include 1. Microphone - Audio input capture 2. Ambient Light Sensor Module - Light intensity measurement 3. Camera - Video capture 4. LDO Regulators (3 TLV74 Series) - Voltage regulation for different components 5. Crystal - Clock generation 6. Touch Sensor Controller - Touch-key interaction 7. Flip-Flop - State keeping in logic circuits 8. LEDs (LTRBR37G Series) - Lighting indication 9. FPC Connector - Interface with main laptop PCB

CheckIt is a daily habit tool. When you complete a habit, flip a switch, then an LED lights up. Future work will include wiring the 24pin FPC port to the Pico which causes an e-paper screen to display a message when a switch is flipped. This PCB runs using a Raspberry Pi Pico and has plans to be battery powered similar to a digital alarm clock.

Welcome to your new project. Imagine what you can build here.

Haptic Glove Controller Board NUCLEO-F411RE based Fixed Servo Connections to match standard servo wiring Revised footprint of 2n3904s transistors since base and emitter footprint were swapped Larger power traces Swapped SDO and SDI of SPI Lines to the FPC connector so it matches with peripheral.

Haptic Glove Controller Board NUCLEO-F411RE based Fixed Servo Connections to match standard servo wiring Revised footprint of 2n3904s transistors since base and emitter footprint were swapped Larger power traces Swapped SDO and SDI of SPI Lines to the FPC connector so it matches with peripheral.

Integration of 2.9" Raw E-Paper Display with Raspberry Pi using FPC and Dedicated PMIC Driver

32 Position FFC, FPC Connector Contacts, Bottom 0.039" (1.00mm) Surface Mount, Right Angle

50 Position FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle #CommonPartsLibrary #Connector #FFC #FPC #OPU #62684