Electromechanical Relay, SPDT, MBB, 6.5VDC (Coil), 360mW (Coil), Random, AC/DC Output #Relay

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Plug Connector 24 Position Board Edge, Surface Mount; Through Hole, Right Angle Global Connector Technology (GCT) USB4155-03-C is a USB Type-C Plug Connector designed for USB 3.2 Gen 2 (USB 3.1 Gen 2 SuperSpeed+) high-speed data applications. It is a right-angle, horizontal SMT connector with a 24-contact configuration, suitable for PCB edge mounting. The connector supports high-speed signal transmission, power delivery, and durable mechanical connection for embedded systems, portable devices, and consumer electronics. Key Features: Connector Type: USB Type-C Plug Connector USB Standard: USB 3.2 Gen 2 / USB 3.1 Gen 2 SuperSpeed+ Number of Contacts: 24 positions Mounting Type: Surface Mount Technology (SMT), right-angle horizontal PCB mounting Data Transfer Rate: Supports high-speed USB 3.2 Gen 2 communication (up to 10 Gbps) Current Rating: Up to 5 A for power delivery applications Voltage Rating: Up to 48 VDC Durability: Rated for approximately 10,000 mating cycles Shielding: Metal shielded housing for EMI protection Contact Finish: Gold-plated contacts for reliable conductivity Operating Temperature: -30°C to +85°C Application: Embedded systems, laptops, tablets, mobile devices, storage devices, and USB-C interface boards Component Classification: Category: Connector / Interconnect Component Subcategory: USB Type-C Connector Not an IC or semiconductor component PCB Footprint Required: Yes Mechanical Part: No (it is an electromechanical connector with soldered electrical terminals) #CommonPartsLibrary #Connector #USBTypeC #USBConnector #USB32Gen2 #USB31Gen2 #SuperSpeedPlus #GCT #BoardMountConnector #SMTConnector #HighSpeedInterface #PCBDesign #ElectronicComponents #InterconnectTechnology

General Purpose Relay SPST-NO (1 Form A) 12VDC Coil Through Hole PCB Power Relay – Electromechanical relay for switching high-current loads in PCB applications. The TE Connectivity Potter & Brumfield T9GV1L14-12 features a 12 VDC coil, 30 A contact rating, SPDT contact configuration, and through-hole PCB mounting design. It is specified for use with resistive and motor loads according to the datasheet. #Relay #PowerRelay #ElectromechanicalRelay #PCBRelay #TEConnectivity

Electromechanical Relay SPDT 30(NO)/15(NC)A 12VDC 225Ohm Through Hole #CommonPartsLibrary #relay #Automotive-relay #ACNM111

Mid-Range Relays, 2 Form C, DPDT, 2 C/O, Coil Suppression Diode, Gold Terminal Plating, 5 A, 28 VDC Coil Voltage, CII FCB-205 Series The M83536/2-024M is a hermetically sealed electromechanical power relay built to comply with the MIL-PRF-83536 military specification family, a standard governing high-reliability relays intended for use in demanding military, aerospace, and defense electronic systems. Devices manufactured under this specification series are designed to meet stringent requirements for mechanical ruggedness, electrical performance consistency, and long-term reliability under the extreme vibration, shock, temperature cycling, and altitude conditions typically encountered in airborne, shipboard, and ground military platforms. This relay is configured as a double-pole, double-throw switching device, meaning it provides two independently switched sets of contacts that can each connect to one of two possible circuit paths, controlled by a single energized coil. This configuration is commonly used in applications requiring simultaneous switching of two separate circuits, such as redundant power path switching, dual-channel signal routing, or coordinated control of multiple subsystems from a single control signal. The relay operates on momentary, non-latching actuation, meaning the contacts return to their de-energized state as soon as coil power is removed, rather than remaining in their last-commanded position. The coil is designed for direct-current control voltage typical of military and aerospace 28-volt electrical systems, a standard power bus voltage used extensively in aircraft, military vehicles, and shipboard electrical systems. The device's flange-style mounting construction allows it to be securely fastened to a chassis or panel, providing the mechanical stability needed to maintain reliable contact performance under the sustained vibration and shock loading common in military platform environments. Internal contact construction uses a silver-cadmium-oxide contact material, chosen for its strong arc-resistance and resistance to contact welding under repeated switching of inductive or resistive loads. As a hermetically sealed device manufactured to a formal military specification, the relay undergoes rigorous qualification and lot-acceptance testing to verify long-term mechanical and electrical performance, including extended life-cycle switching tests, vibration and shock qualification, and environmental exposure testing. This makes the part suitable for use in flight-critical, mission-critical, or other high-reliability electromechanical switching applications where field failure is not an acceptable risk. The relay is supplied with through-hole solder-pin terminations for both coil and contact connections, supporting traditional through-hole assembly methods consistent with the conservative, well-proven manufacturing processes favored in military and aerospace hardware production. Spec Sheet Identification Part Number: M83536/2-024M Specification Family: MIL-PRF-83536 Manufacturer: TE Connectivity (CII) Functional Classification Device Type: Electromechanical power/signal relay Contact Configuration: Double-pole, double-throw (DPDT) Actuation Type: Momentary, non-latching Coil Input Type: DC control Electrical Characteristics Coil Voltage: Military-standard 28V DC class Coil Resistance: Moderate coil resistance class Contact Rating: Mid-range current switching class Contact Voltage Rating: Compatible with 28V DC and standard AC switching voltages Output Type: AC/DC switching capable Contact & Construction Details Contact Material: Silver-cadmium-oxide (AgCdO) Contact Form: 2 Form C (DPDT, normally open/normally closed) Sealing: Hermetically sealed construction Mounting Style: Flange mount, through-hole Environmental & Qualification Specification Compliance: MIL-PRF-83536 military relay specification Application Class: Military and aerospace electromechanical switching Export Classification: EAR99 export control classification RoHS Compliance: Yes Mechanical Specifications Termination: Solder pin, through-hole Mounting Type: Through-hole, flange-mounted Build Style: Mid-range relay form factor consistent with the M83536 family Packaging Supply Format: Individually packaged per military relay handling and ESD protection standards #M83536 #TEConnectivity #MilitaryRelay #AerospaceRelay #MILPRF83536 #DPDTRelay #ElectromechanicalRelay #HermeticallySealed #PowerRelay #SignalRelay #DefenseElectronics #AviationElectronics #FlangeMount #ThroughHole #MilAeroComponent #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #HighReliabilityRelay

Optical Sensor Through-Beam 0.197" (5mm) PCB Mount The EE-SX4081 specification defines the engineering requirements for a slot-type photomicrosensor designed for non-contact object detection and position sensing in electronic and electromechanical systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure accurate optical sensing, reliable switching performance, and long-term operational stability. The component is intended for use in industrial automation, office equipment, consumer electronics, and embedded control systems requiring precise detection of object presence, motion, or position. The integrated infrared emitter and phototransistor receiver provide dependable sensing through interruption of the optical path, enabling high-speed, contactless detection in compact system designs. Engineering Requirements The photomicrosensor shall be manufactured using qualified optoelectronic components and controlled production processes to ensure consistent sensing performance, mechanical integrity, and long service life. The optical assembly shall maintain accurate alignment between the emitter and receiver to provide stable detection characteristics throughout the specified operating conditions. Electrical characteristics shall provide reliable switching response, stable output behavior, and low power consumption while maintaining consistent sensitivity across the intended operating voltage and temperature ranges. The sensor shall exhibit reliable performance under normal ambient light conditions and shall maintain signal integrity during continuous operation. Mechanical construction shall ensure precise slot dimensions, secure mounting capability, and resistance to vibration, mechanical shock, and thermal cycling encountered during normal operation. The package shall be suitable for printed circuit board assembly and shall withstand standard soldering and handling processes without degradation. Workmanship shall be free from defects including contamination, optical misalignment, package damage, corrosion, or structural irregularities that could affect sensing accuracy or reliability. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, optical performance data, qualification reports, inspection records, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete traceability throughout the product lifecycle. Revision Control Any modification to this specification shall be processed through the formal engineering change management system. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #Photomicrosensor #OpticalSensor #SlotSensor #IndustrialAutomation #EmbeddedSystems #Optoelectronics #QualityAssurance #EngineeringDocumentation #ElectronicComponents

Electromechanical Relay SPST-NO 0.5A 12VDC 500Ohm Through Hole

Electromechanical Relay 5VDC 112Ohm 10A SPDT

Electromechanical Relay 24VDC 5A SPST-NO(21.3x5.08x12.6)mm THT Control Relay #CommonPartsLibrary #Relay

Electro-mechanical machine which converts the electrical energy into mechanical energy.

General-Purpose Power Relay – Single-Pole Double-Throw (SPDT, 1 Form C) electromechanical power relay designed for industrial control, home appliances, power supplies, HVAC systems, motor control, automation equipment, and embedded switching applications. Features a 5 VDC coil voltage, 10 A contact rating, and supports switching of up to 250 VAC or 125 VDC loads. Equipped with AgSnO (silver tin oxide) contacts for high durability and excellent switching performance, it provides fully sealed construction for improved environmental resistance. The relay has a through-hole PCB mount, non-latching coil with 63 Ω coil resistance (79.4 mA coil current), 10 ms maximum operate time, 5 ms maximum release time, and Class B coil insulation. Certified by UL, CSA, TÜV, and VDE, it operates over a −25°C to +85°C temperature range and is supplied in a compact PCB through-hole package. #Aratas #G5LE14DC5 #PowerRelay #SPDTRelay #ElectromechanicalRelay #GeneralPurposeRelay #10ARelay #5VRelay #IndustrialAutomation #MotorControl #ThroughHole #EmbeddedSystems

MCB is an electromechanical device that switches off the circuit automatically if an abnormality is detected. The MCB easily senses the overcurrent caused by the short circuit

Telecom Relay DPDT (2 Form C) Surface Mount The G6K-2F-Y DC5 specification defines the engineering requirements for a low-profile dual-pole signal relay designed for precision switching in electronic control and communication systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure reliable signal switching, low contact resistance, and long-term operational stability in compact electronic assemblies. The relay is intended for use in telecommunications equipment, instrumentation, industrial control systems, automated test equipment, and embedded electronic applications requiring high-reliability signal routing. It provides electrically isolated switching with low power consumption and stable contact performance, making it suitable for low-level signal and logic circuit applications. Engineering Requirements The relay shall be manufactured using qualified electromechanical components and controlled production processes to ensure consistent switching characteristics, mechanical durability, and long service life. The internal contact system shall provide reliable electrical continuity and repeatable switching performance throughout the specified operational life. Electrical characteristics shall ensure stable contact resistance, low coil power consumption, high insulation resistance, and reliable dielectric isolation between coil and contact circuits. The relay shall maintain dependable switching performance under specified voltage, current, temperature, and environmental operating conditions. Mechanical construction shall provide accurate contact alignment, secure enclosure integrity, and resistance to vibration, shock, and thermal cycling. The package shall be suitable for printed circuit board mounting and compatible with standard electronic assembly and soldering processes without degradation of performance. Workmanship shall be free from defects including contamination, corrosion, mechanical deformation, contact misalignment, or structural irregularities that could adversely affect electrical or mechanical reliability. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, qualification reports, inspection records, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #SignalRelay #ElectromechanicalRelay #ElectronicSwitching #IndustrialElectronics #EmbeddedSystems #Telecommunications #QualityAssurance #EngineeringDocumentation #ElectronicComponents

The 24T 10A250V is an electromechanical switch component commonly used for AC power control, appliance switching, industrial equipment interfaces, and general-purpose electrical control applications. This device is designed to handle moderate current and voltage loads while providing reliable manual switching performance in consumer and industrial electronic systems. The switch is typically implemented as a rocker, toggle, or push-type power switch depending on the manufacturer-specific configuration. It is engineered to provide stable electrical contact operation, mechanical durability, and long operational service life under repeated switching cycles. The component is commonly used in AC mains-powered equipment, power distribution systems, control panels, laboratory instruments, and embedded electronic hardware requiring user-accessible power control. Its robust contact structure and insulated housing design support safe operation in electrically demanding environments while simplifying panel integration and wiring assembly processes. Engineering Specification Device Type Electromechanical power switch Switching Function Manual AC power switching control Electrical Rating Suitable for moderate AC voltage and current operation Contact Characteristics High-reliability conductive switching contacts Mounting Style Panel mount or PCB mount depending on manufacturer configuration Mechanical Operation Manual actuator-based switching mechanism Housing Material Flame-retardant insulated enclosure structure Contact Material Durable conductive alloy contact system Reliability Features Long mechanical and electrical operational lifespan Safety Characteristics Designed for safe AC mains switching applications Environmental Characteristics Suitable for consumer and industrial operating environments Applications AC power control Industrial equipment Consumer appliances Embedded electronics Power distribution systems Laboratory instrumentation Control panels Electrical equipment Power switching interfaces General-purpose electronic systems Manufacturer Commonly associated with generic industrial switch manufacturers #commonpartslibrary #powerswitch #electromechanical #acswitch #powerelectronics #industrialelectronics #controlsystems #embeddedhardware #electronicsdesign #powermanagement #panelmount #electricalswitch #consumerelectronics #powersystems #electromechanicalcomponents

Infrared (IR) Emitter 940nm 1.25V 50mA 20° Radial The IR928-6C-F specification defines the engineering requirements for an electromechanical relay component intended for signal or power switching applications in industrial, commercial, and electronic control systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure dependable switching performance, long-term operational reliability, and compatibility with applicable engineering standards. It serves as the primary technical reference for design integration, manufacturing, inspection, testing, and product acceptance. The component is designed to provide reliable isolation and controlled switching of electrical circuits while maintaining stable performance under specified operating conditions. It shall be suitable for integration into printed circuit board assemblies and electronic control equipment where dependable relay operation and electrical isolation are required. Engineering Requirements The component shall be manufactured using qualified materials and validated production processes to ensure consistent electrical characteristics, mechanical durability, and long service life. Construction shall provide reliable contact operation, insulation integrity, and resistance to mechanical and environmental stresses encountered during normal operation. Electrical performance shall comply with the specified operating voltage, switching capacity, insulation resistance, dielectric strength, and contact reliability requirements. The relay shall maintain stable switching characteristics throughout its specified operating temperature range and expected service life. Workmanship shall be free from defects including cracks, contamination, corrosion, misalignment, or physical damage that could impair electrical performance or mechanical operation. Manufacturing, inspection, and functional testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with approved engineering specifications. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change management process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, material certifications, inspection reports, qualification records, manufacturing instructions, and revision-controlled technical documentation. All records shall be maintained in accordance with the organization's quality management and configuration control procedures. Revision Control All revisions to this specification shall be processed through the formal engineering change control system. Technical changes shall be reviewed, validated, and approved to ensure continued compliance with design intent, manufacturing requirements, and applicable industry standards. #EngineeringSpecification #ElectromechanicalRelay #RelayComponent #ElectricalEngineering #IndustrialElectronics #QualityAssurance #Manufacturing #EngineeringDocumentation #Compliance

The CPDT-12V is an electromechanical relay designed for switching and control applications in industrial, automotive, consumer, and embedded electronic systems. Operating from a nominal twelve-volt coil supply, this relay provides reliable isolation between low-power control circuitry and higher-power loads. Its compact construction, robust contact mechanism, and dependable switching performance make it suitable for power distribution, automation controls, battery-powered equipment, protection circuits, and general-purpose switching applications. The relay incorporates a magnetic coil and mechanical contact assembly that enables safe control of AC or DC loads while maintaining electrical isolation between the control and load sides. Its durable design supports repeated switching operations and long service life in demanding environments. Features Electromechanical relay with nominal twelve-volt coil operation Provides galvanic isolation between control and load circuits Suitable for AC and DC load switching Reliable contact performance for power and signal applications Compact package for PCB mounting Low control power requirement Durable contact system for long operational life Fast switching response characteristics Compatible with industrial and embedded control systems Designed for automation, protection, and power management circuits Applications Industrial automation equipment Power control modules Battery-powered systems Automotive electronics Home appliance control circuits Smart energy management devices Security and alarm systems Embedded controller interfaces Motor and actuator switching General-purpose load control applications Electrical Characteristics Nominal coil voltage: twelve volts DC Electromagnetic actuation mechanism Isolated contact structure Designed for low-voltage control interfaces Supports switching of resistive and inductive loads Stable operation across specified environmental conditions Mechanical Characteristics PCB-mount relay construction Compact footprint for space-constrained designs Durable housing for electrical and mechanical protection Secure terminal arrangement for reliable soldering and connection Engineered for repeated switching cycles Environmental Characteristics Suitable for indoor industrial and commercial environments Resistant to normal operating vibration and mechanical shock conditions Designed for reliable operation across standard electronic equipment temperature ranges #commonpartslibrary #relay #electromechanicalrelay #switchingdevice #powermanagement #industrialautomation #controlsystems #pcbmount #automationelectronics #circuitprotection #embeddedsystems #industrialelectronics

Flat Vibration Motor 3V Motors - AC, DC RoHS LCM1027A2445F is a compact electromechanical buzzer component designed for audible notification and alert functions in embedded electronic systems. The device is engineered to generate stable acoustic output with low power consumption, making it suitable for portable electronics, industrial control equipment, alarm systems, and user interface applications requiring reliable sound indication. This buzzer is commonly integrated into embedded hardware platforms for status indication, warning alerts, keypad feedback, and operational notifications. Its compact package and surface-mount compatibility enable efficient integration into space-constrained PCB layouts while supporting automated assembly processes. The LCM1027A2445F is optimized for dependable acoustic performance and long operational life across a wide range of environmental conditions. It is widely used in consumer electronics, smart devices, communication equipment, medical instruments, and battery-powered embedded applications requiring compact and efficient audible signaling functionality. #commonpartslibrary #buzzer #audioindicator #embeddedhardware #electronicscomponents #acousticdevice #surfacemountdevice #portableelectronics #industrialelectronics #alarmsystem

Panasonic-JSM1-12V-4-0-0-* https://www.panasonic-electric-works.com/pew/eu/downloads/ds_61211_en_jsm_pd.pdf +85°C -40°C Relay 53.3mA 640mW 225Ω Non-Latching 25A Electromechanical Panasonic Power Relay 12VDC 10A SPDT(22x16x16.4)mm THT Automotive 769-JSM1-12V-4 1 PTH_RELAY_20MM0_16MM0 yes 0.3mm 15A 160W +85°C -40°C SPDT 16V